Synergy Heavy Duty Tie Rod - 14-25 Ram 2500/3500

Product Name: Synergy Heavy Duty Tie Rod - 14-25 Ram 2500/3500
Manufacturer: Synergy
Manufacturer Part #: 8702-11
Thoroughbred Diesel Part #: SYN8702-11
Fitment Notes: 14-25 Ram 2500/3500

Upgrade your Ram’s steering with unmatched strength and confidence using the Synergy 2014+ Ram 2500 / 3500 Heavy Duty Tie Rod. Engineered for both the hot shot haulers who demand maximum durability and daily drivers who expect precise handling and easy installation, this tie rod features massive 1.75" heat-treated chromoly construction, delivering extreme strength where it matters most. 

Outfitted with Synergy’s signature metal-on-metal tie rod ends, this tie rod delivers exceptional longevity and precision. Unlike weaker tie rod ends that still contain a nylon liner, our metal-on-metal ends are fully greaseable and engineered to perform under extreme loads — providing unmatched durability and steering feel in all conditions. It’s a direct bolt-in replacement for your stock tie rod and a serious upgrade over lesser aftermarket alternatives — built to take the hits and keep your steering tight and responsive whether you are heavy hauling, daily driving, or rock crawling.

For the most reliable steering on the market, pair this tie rod with our Heavy Duty Drag Link and Heavy Duty Track Bar and elevate your driving experience. 

Notes:

• Replacement Tie Rod Ends: 
  • Driver side: 4138-L
  • Passenger side: 4168-L
• New single plane tie rod end - part number 4168-L - is not compatible with the metal misalignment caps (part number 4134-02)
  • If upgrading to the new single plane tie rod end on older model tie rods that include the metal caps, the opposing tie rod end will require a new poly boot part number 4131-01
  • If the cotter pin does not engage the castle nut upon install, a washer is required; Washer may not be required on all knuckles depending on casting differences and wear
• Recommended Fox Steering Stabilizers:
  • IFP - Internal Floating Piston - 6401-01
  • TS - Through Shaft - 6402-11
  • ATS - Adjustable Through Shaft - 6403-11
• Additional steering stabilizer options: KING 2.0 and KING 2.5 Performance Stabilizers
• Backwards compatible with stock drag link, Synergy Heavy Duty Drag Link part number 8701-01 is recommended for best experience
• Synergy High Performance Grease part number 4119 recommended to be used with all Tie Rod Ends
• Synergy Premium Copper Infused Anti-Seize part number 4118 to be used with all threaded components (TRE's and Adjuster Sleeve)
• Steering Stabilizer Clamp part number 4050-75 required to retain steering stabilizer
• Supersedes part number 8702-01
  

Min/Max Lengths:
Measured in a straight line from center of tie rod end to center of tie rod end

• Min collapsed length: 60.00"
• Max extended length: 62.75"

Includes:

• (1) 8702-11 Ram tie rod
• (1) Grade 8 Pinch Bolt Hardware Kit

Benefits:

• Heavy duty 1.75" USA made heat-treated chromoly offers extreme strength and reliability, providing a stronger connection to the road and trail, unmatched durability, and preventing unwanted wandering
• Heat treated tie rod is over 200% stronger than OEM and formed post heat treating for superior strength - eliminating any chance of bending or breaking
• Synergy metal on metal tie rod ends are stronger and more durable than stock, greaseable for easy maintenance, and feature a heat treated ball bearing and forged bearing housing for maximum durability
• Single plane tie rod ends eliminate unwanted tie rod flop and prevent the "dead spot" commonly associated with hydro assist steering
• Fully adjustable without removing from the vehicle with our Synergy Double Adjuster Sleeve and Pinch Bolt Assembly
• Sealed from the elements with our pinch bolt forgings, preventing your tie rod from corroding from the inside out
• Compatible with stock wheels and tires
• Bolts to the factory locations with no drilling required

Synergy Features:

• Engineered and precision bent from USA made 1.75" x 0.188 wall DOM tubing for maximum strength
• Synergy metal on metal, fully greaseable tie rod ends include a 4140 steel shank, a 1018 steel bearing housing, and capped with a heavy duty nitrile-butadiene rubber boot and retaining spring
• Two stage abrasion resistant powder coat finish for maximum durability and corrosion resistance
• Retains factory mounting locations and mounting hardware
• Synergy Dual Durometer Bushings with Teflon Bearing surface for a maintenance free design focusing on performance, articulation, longevity, and ride quality
• Synergy Double Adjuster Sleeve and Pinch Bolt Assembly eliminates jam nuts and allows for easy adjustability
• 100% bolt-in components assures and easy, trouble free installation with the use of basic hand tools
• For more information on Synergy call us at 1-859-737-4966