Hot Seller
S-03

Mads Smarty Tuner S-03

Thoroughbred Sku #: SMAS-03
Manufacturer Sku #: S-03


$645.00

free-shipping-no-handling

Applications:

View All applications

VERIFY VEHICLE FIT
Add a Digital Monitor?

Product Details

Product Name: Mads Smarty Tuner S-03
Manufacturer: Mads Smarty
Manufacturer Part #: S-03
Thoroughbred Diesel Part #: SMAS-03
Fitment Notes: Mads Smarty Tuner S-03 - 98.5-02 Dodge Ram 2500-3500 (Diesel) 5.9L (24 Valve)

The Smarty Tuner box is one of the most advanced, horsepower capable units on the market today, with the versatility of adding gobs of non-stop torque multiple ways. Either tune your vehicle with a mild, economy based tune, or take it to the next level and use it as an add on (stackable) programmer to add tire melting power, or endless lanes of black smoke to your 5.9 Cummins based Dodge Ram.

Software Settings

  • * SW# 0: Half power
  • * SW# 1: Fuel Saver
  • * SW# 2: Only more fuel and Boost
  • * SW# 3: Like # 2 + smarty added timing
  • * SW# 4: Soft CaTCHER no added timing
  • * SW# 5: Like # 4 + added Timing
  • * SW# 6: Mild CaTCHER no added timing
  • * SW# 7: Like # 6 + added Timing
  • * SW# 8: CaTCHER no added timing
  • * SW# 9: CaTCHER with Timing

Software Module Zero
About half the power of a stock software. Use it whenever reduced power is desired or when you have to make sure that NO SMOKE is produced.

Software Module One
The Fuel Saver software. Mpg gains vary, in most cases a + 2 MPG has been reported. Please note that the timing in this software is rather aggressive. HEAVY TOWING is not recommended with this software setting.

Software Module Two
This software increases the fuel delivered by the ECM.

Software Module Three
Same as software # 2 but timing has been added.

Software Modules Four to Nine
The even numbered software are identical to the odd numbered ones, except for the timing. The software setting without added timing are intended for use with timing adding boxes.

The power gain at top RPM with these software settings is almost identical. These settings differ greatly in HOW they get there. Than higher the software number then more aggressive the throttle response from idle speed up. Aggressive to the point that the software modules Eight and Nine can become difficult to handle on slippery roads.

Features:
  • CaTCHER software modules.
  • Ten different performance levels.
  • Fastest download in the industry, a typical ECM update takes just two minutes.
  • ABS tire height updates in just seconds.
  • Not traceable by the dealer in the stock setting. Smarty leaves no footprint.
  • Cold weather 3 Cylinder High Idle is enabled in all software.
  • Reads Diagnostic Trouble Codes in plain text.
  • No tools required, no fuses to pull.
  • USB built in for simple updates.
  • Most complete keyboard in the industry.
  • Reliable, it works off your OEM ECM hardware.
  • Smart Tuners WILL NOT delete the DPF/EGR

Reviews

  • 2001 Dodge 2500 4WD, 5.9L 24 valve 6 speed manual trans. Everything factory except 4" exhaust. I hooked up the Smarty SO3 for the 1st time. Upon connection the screen showed V:1.26c D:R12A. Not the same as Smarty literature in the box. Is this ok? I moved ahead and downloaded CaTCHER #1 and tried it. Wow! Acceleration is quicker with smoke during the accel that I never had before. I assume that's normal. Tires are stock size so I'm guessing I don't need to mess with ABS or tire size, right?

    Gary Ramus | 7/16/2021

    Yes. that is correct.

  • I just installed a hot rod vp44 on my 02. My Edge comp doesn't work with the new injector pump I believe it's because of timing. Will this tuner work or if not what do you suggest

    Robert | 12/16/2020

    Edge comp should work with hotrod pump. Yes the smarty is an OBDII loaded tuner.

  • what is the best tune to run on 02 dodge cummins s03 i have 165 fass pump 4inch strat pip

    michael | 1/12/2021

    Level 3 or level 5,but vehicles react differently.