kits will require dropping the tank or installing a suction
All AirDog® 150 & AirDog® II 200 Systems
truck that is equipped with an in tank fuel pump will
require a suction tube or module upgrade kit.
pump do I need for my truck?
AirDog® and AirDog® II 100 units are recommended
for up to 500 horsepower.
150 and AirDog® II 165 units are recommended for
horsepower up to 800.
II 200 units are recommended for anything that exceeds
daily drive my truck and it is only 300 horsepower.
Will running an AirDog® 150 or AirDog® II 165
No it will not hurt the pump. But it could cause you
headaches down the road. Running way too much fuel to
an injection pump that can't handle it can cause an
increase in fuel pressure, which on some trucks could
cause damage to that injection pump and possibly cause
it to fail. Running a pump to fit your horsepower is
suggested and will help keep you away from small potential
is the difference between the AirDog® 100 and AirDog®
Physically there are not differences. The pumps are
the exact same size. The AirDog® 100 motor is a
2000 r.p.m. motor and the AirDog® 150 motor is a
3000 r.p.m. motor. The differences between the two are
as described. The AirDog® 100 is a 100 g.p.h. pump.
The AirDog® 150 is a 150 g.p.h. pump. Depending
on the application, the installation kits will differ
have a Ford truck that I have put a Cummins engine in.
What kit do I need?
With all unique truck builds. It is possible to need
a miscellaneous part or two. When picking one of our
products to fit your truck. You will need to get the
kit that fits the engine for what you are running. Example:
2005 Ford with a Cummins out of a 2001 Dodge. You will
need a kit for a 2001 Dodge.