Zone Offroad 6.5" Suspension Lift Kit - 14-18 Chevy/GMC Silverado/Sierra 1500 RWD (Trucks w/cast steel front control arms)

Product Name: Zone Offroad 6.5” Suspension Lift Kit - 14-18 Chevy/GMC Silverado/Sierra 1500 RWD
Manufacturer: Zone Offroad
Thoroughbred Diesel Part #: ZONC331418GM
Fitment Notes: 2014-2018 Chevy/GMC Silverado/Sierra 1500 RWD

Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability your truck deserves with clearance for 35" tires.

Important Notes

• Check Control Arms: GM produced cast steel, stamped steel and aluminum control arms between 2014 and 2017. Use the reference image to help identify your stock control arms; cast steel will be replaced with cast steel, stamped steel and aluminum control arms will be replaced with aluminum.
• Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference.
• Maximum Rear Shock length is 29-3/4" due to driveshaft to cross member interference.
• Requires 1/4" wheel spacer to accommodate stock 20" rims.
• To reduce trimming required for tire fitment, a 20" wheel w/5.75" backspacing is recommended.

Recommended Tires & Wheels
(Trimming may be required)

• 35 x 12.5 with 17 x 9 and 5 in. Backspace
• 35 x 12.5 with 18 x 9 and 5.25 in. Backspace
• 35 x 12.5 with 20 x 9 and 5.75 in. Backspace

Shock Option

Nitro Series

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• Self-lubricating seals
• Black powder coat finish

FOX 2.0 Adventure Series

• 2-inch diameter steel body
• Internal floating piston (IFP) monotube design
• Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application-specific valving to maximize performance
• Long-lasting silver coated finish

Zone Offroad Features:

• High strength crossmembers to correct lower control arm positioning.
• Ductile iron steering knuckles to correct steering geometry and maintain FMVSS No126 (ESC System) compatibility.
• Top mounted strut spacers to provide lift and install easily.
• Rear 5" lift block and u-bolt kit to lift and level the stance.
• Sway bar, bracket line and bump stop relocation brackets to correct operating angles.
• Allows clearance for up to 35" tires
• For more information on Zone Offroad call us at 1-859-737-4966