Zone Offroad 6.5" Radius Arm Lift Kit (Nitro Shocks) - 14-18 Dodge/Ram 2500 4WD Diesel

Product Name: Zone Offroad 6.5” Radius Arm Lift Kit (Nitro Shocks) - 14-18 Dodge/Ram 2500 4WD Diesel
Manufacturer: Zone Offroad
Manufacturer Part #: ZOND58N
Thoroughbred Diesel Part #: ZOND58N
Fitment Notes: 2014-2018 Dodge/Ram 2500 4WD Diesel

Take your RAM 2500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from front/rear coil springs and stout radius arms to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires.

Important Notes

• Fits trucks equipped with the 6.4L gas engines.
• Front drive-line vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit.
• Does NOT work for models with factory rear airbag suspension.
• Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
• 6.4L Gas models will require exhaust modification to clear the front driveshaft. 5.7L Gas models may require modification
• Factory wheels fit when paired with factory / original equipment tire size. 

Recommended Tires & Wheels
(Trimming may be required)

• 37 x 12.5 with 17 x 9 and 4.5 in. Backspace
• 37 x 12.5 with 18 x 9 and 5.75 in. Backspace
• 37 x 12.5 with 20 x 9 and 5.75 in. Backspace

Nitro Series

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• Self-lubricating seals
• Black powder coat finish

Zone Offroad Features:

• Progressive rate front and rear coil springs improve ride quality and offroad performance while lifting and levelign the stance.
• HD radius arm to correct caster while maximizing ground clearance.
• Forged pitman arm and track bar relocation bracket to correct steering angles and recenter front axle.
• Extended bump stops, sway bar relocation and brake line relocation to maintain factory-like operating angles.
• Bump stop extensions, track bar bracket and sway bar correction to correct suspension geometry
• For more information on Zone Offroad call us at 1-859-737-4966