WC Fab S300 Single Turbo Install Kit, for 2001-2004 Duramax LB7

Product Name:WC Fab S300 Single Turbo Install Kit, for 2001-2004 Duramax LB7
Manufacturer: WC Fab
Manufacturer Part #: WCF100478
Thoroughbred Diesel Part #: WCF100478
Fitment Notes: 2001-2004 Duramax LB7

This kit will allow you to install an S300-based Turbo on your LB7 Duramax. Replacing all OEM plumbing and y-bridge with high flow 3" diameter piping. Oil Lines are high-quality stainless steel braided Parker Lines with the oil feed line routing from the main oil galley on the side of the engine block. We designed our down pipe to connect with your exhaust system V-Band and clamp, which simplifies installation and does not require you to cut your exhaust system.
If you are not purchasing the turbo from us, you must specify the brand you are using. Some turbos you may be required to ship to use for mock-up to build the kit.

Includes Driver Side Transmission Dipstick Tube, making installing the down pipe easier.

***NOTE: Our downpipe is an HX40 style flange connection at the turbo, as this style offers the best seal, alignment, and easiest install. If you are not purchasing the turbo from us you will need to make sure your exhaust housing is machined to HX40 style outlet flange! Note the picture above for the HX40 flange vs the full marmon standard style.

The OEM turbo coolant feed port on the upper radiator pipe from the thermostat housing will interfere with the larger WCFAB Turbo Intake in this Kit. You MUST use a WCFAB Billet forward-facing thermostat housing Kit WCF100405 or our Modified OEM Pipe WCF100797. Billet Coolant Port Block Off Plugs DO NOT allow enough room for clearance on LB7 Models.

Note (Current WC Fab Lead Times):

• In Stock Items: 3-5 Business Days
• Most Built to Order Powder Coasted Items: 10-15 Business Days
• Traction Bars: 10-15 Business Days

WC Fab S300 Single Turbo Install Kit Features:

• 4" Intake
• Dry Air Filter
• Outerwear's Pre-Filter Cover
• T4 Pedestal with Hardware
• Stainless Steel Oil Feed and Drain Lines with Fittings
• 3" Fabricated High Flow Y-Bridge
• 3" Hot Side Intercooler Pipe
• 3" Cold Side Intercooler Pipe
• 3" Down Pipe with High Temp Coating (Mates to exhaust system flange)
• Driver Side Trans Dipstick tube
• Silicone Boots
• T-Bolt Clamps
• V-Band Clamps
• Heat wrap
• Powder Coating
• For more information on WC Fab call us at 1-859-737-4966.