Thoroughbred Fuel System Contamination Kit with DCR 23-26 Ford

Product Name: Thoroughbred Diesel Contamination Kit WITH DCR for Ford 6.7L Powerstroke (2023–2026)
Manufacturer: Thoroughbred Diesel 
Thoroughbred Diesel Part #: TDPFCK2326DCR
Fitment Notes:2023-2026 Ford 6.7L Powerstroke

A CP4 failure is not a minor repair. When it happens, metal debris, DEF fluid, or water contamination can spread throughout the entire fuel system in seconds, damaging injectors, rails, sensors, and fuel lines. Thoroughbred Diesel’s Fuel System Contamination Kit paired with the S&S DCR for the 2023–2026 Ford 6.7L Powerstroke is engineered as a complete recovery solution after a catastrophic fuel system failure.

This Contamination Kit provides more comprehensive coverage than the OE offering, replacing all major contamination-prone components that must be addressed after a CP4 failure. Simply flushing the system is not enough. If contaminated components are reused, repeat failures are almost guaranteed. This kit eliminates that risk by addressing the full scope of the damage.

All components are OEM or OEM-equivalent, USA assembled, and built in an ISO 9001:2015 certified facility, ensuring proper fitment, reliability, and long-term durability. This kit is also designed to work seamlessly with S&S Diesel CP4 to DCR conversion kits, allowing you to remove the failure-prone CP4 while restoring the fuel system correctly.

Contamination Kit Features & Benefits

1. Complete Fuel System Recovery After Catastrophic Failure
2. Designed specifically for CP4 failure, DEF contamination, or water-in-fuel events
3. More Comprehensive Than OE Repair Options
4. Replaces all major high-risk fuel system components
5. OEM or OEM-Equivalent Components
6. No reused or partially serviced parts
7. USA Assembled
8. Built in an ISO 9001:2015 certified facility
9. Ideal when upgrading away from the CP4 platform
10. Backed by AP Two-Year Unlimited Mileage Warranty
11. Confidence after a major repair

Contamination Kit Contents – 2023–2026 Ford 6.7L Powerstroke

1. S&S CP4 to DCR Conversion
2. 4 New Bosch Left Bank Injectors
3. 4 New Bosch Right Bank Injectors
4. Fuel Filter Kit
5. Injector Install Kit
6. Includes injector lines and hold-down bolts
7. Fuel Cooler
8. Injector Return Line Kit
9. Miscellaneous Gasket and O-Ring Kit
10. Driver-Side Fuel Rail
11. Includes DRV and fuel pressure sensor
12. Passenger-Side Fuel Rail
13. Low-Pressure Fuel Pressure Sensor
14. 9th Injector
15. Fuel Delivery Line Pack
16. Injection pump feed and crossover lines

IMPORTANT INSTALLATION REQUIREMENT

If your truck has experienced a fuel system contamination event, a lift pump is REQUIRED and must be purchased separately.

After a CP4 Contamination, the factory fuel system alone is not capable of properly supporting and protecting new components. Installing this Contamination Kit without a lift pump can result in repeat failures, injector damage, and potential warranty issues.

A quality lift pump is critical to:

1. Maintain proper fuel supply pressure
2. Improve filtration and remove contaminants
3. Eliminate air from the fuel system
4. Protect new injectors, rails, and sensors

This Contamination Kit is not a complete repair without a lift pump when contamination has occurred.

For lift pump recommendations or technical assistance, contact Thoroughbred Diesel at 1-859-737-4966 before installation.

Why Choose a Thoroughbred Diesel Contamination Kit?

Fuel system Contaminations are expensive, time-consuming, and unforgiving if repaired incorrectly. Thoroughbred Diesel’s Fuel System Contamination Kit for the 2023–2026 6.7L Powerstroke is designed to eliminate shortcuts and prevent repeat failures by addressing the entire contaminated system, not just the obvious damaged parts.

Restore your Powerstroke after Contamination with confidence.

Choose Thoroughbred Diesel.