Synergy Heavy-Duty Steering Kit - 2000-2002 Dodge Ram 2500/3500 4WD

Product Name: Synergy Heavy-Duty Steering Kit | 2000-2002 Dodge Ram 2500/3500 4WD
Manufacturer: Synergy
Manufacturer Part #: 8525-02
Thoroughbred Diesel Part #: SYN8525-02
Fitment Notes: 2000-2002 Dodge Ram 2500/3500 4WD

This Heavy Duty Steering Kit is a larger and stronger, bolt-on replacement for the stock steering. No drilling or reaming of the knuckles is required. It uses the updated factory T-style steering design to eliminate toe-change caused by Y-style steering. Using the factory T-style steering design also results in no induced bump steer inherent with most aftermarket "cross over" steering kits. The Tie Rod also uses low misalignment "wobble stopper" Tie Rod End Boots to prevent unwanted Tie Rod "flop" which results in a dead spot in the steering when changing direction. The complete kit includes a heavy duty Drag Link, heavy duty Tie Rod, and Steering Stabilizer Mount Kit for use with stock or aftermarket steering stabilizers using a 1/2" mounting bolt.

Includes:

• (1) 8567-12 Drag Link
• (1) 8568-02 Tie Rod
• (1) 4050-50 Steering Stabilizer Clamp

Notes:

• We cannot guarantee fitment with aftermarket differential covers. Known compatibility with the following diff covers: Mag Hitec
• Recommended Steering Stabilizers:
  • Fox Steering Stabilizers: 6401-01 (IFP), 985-02-128 (TS), 983-02-142 (ATS)
  • Falcon Steering Stabilizers: 01-02-21-10-112, 01-02-22-110-112

Synergy Features:

• Drag Link is bent to clear factory axle brackets and is compatible from stock to 4" lifted vehicles. (Vehicles over 4" of lift will require a drop pitman arm for compatibility)
• Tie Rod is bent to clear sway bar mounts and steering pitman arm
• Provides 2" of additional ground clearance from stock tie rod
• Fabricated clamp to retain factory or aftermarket stabilizer with 1/2" mounting bolt
• Drag Link is made from 1-1/2" x .250 wall DOM
• Tie Rod is made from 1-1/2" x .188 wall 4130 Chromoly and Heat Treated for maximum strength - (200%) stronger than stock tie rod
• Synergy Double Adjuster Sleeve allows adjustment of tie rod length without removing it from the vehicle
• Steering components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Tie rod ends include low misalignment "wobble stopper" grease boots to prevent unwanted Tie Rod "flop"
• The steering kit comes with Synergy HD metal on metal tie rod ends
• For more information on Synergy call us at 1-859-737-4966