Hot Seller
suncoast-sc-68-guardian-1
suncoast-logo

Suncoast 68RFE GUARDIAN Rebuild Kit (WITH CONVERTER) (TOWING)

Thoroughbred Sku #: SUNSC-68-GUARDIAN-CRE

Your Selected Vehicle Does Not Fit, Please Select a Vehicle

Select a Vehicle

Selected Vehicle

Year/Make/Model: {{year}} {{make.Name}} {{model.Name}} Edit

Item Options:

Prop 65:
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov


PAYMENT NOTE: If you choose Pay Core Later, from the Core option below, you will not be able to pay for this order using Affirm or PayPal

$3,495.00

free-shipping-no-handling

core learn more button I have read and I accept the terms and conditions.

Applications:

View All applications

VERIFY VEHICLE FIT

Product Details

Product Name: Suncoast 68RFE GUARDIAN Rebuild Kit with Torque Converter (TOWING)
Manufacturer: Suncoast
Manufacturer Part #: SC-68-GUARDIAN
Thoroughbred Diesel Part #: SUNSC-68-GUARDIAN
Fitment Notes: 2007-2018 Dodge 6.7L Cummins

The 68RFE

The 68RFE transmission is the big brother to the 45/545RFE transmission. The RFE platform was originally designed by Chrysler and was introduced in 1999 with the debut of the new Jeep Grand Cherokee.

The "RFE" stands for Rear-wheel drive Fully Electronic control. The RFE design was mostly noted in the new design to have 3 

planetary sets for a 4-speed transmission in the 45RFE. 

In 2007, Chrysler debuted the new 6.7 Powerplant in the all new Dodge Ram, and Dodge wanted a transmission that was specifically designed for function. The previous platform utilized the Torqueflite 48RE platform and had been around since the late 50's when they released the first 727 in 1956 after purchasing the license from Simpson on the gearset in 1955. 

The 46/47/48 Chrysler platforms were 3 and 4-speed units that were mechanically and hydraulically controlled, with the most notable control system being governor pressure.

The first improvement Chrysler wanted to make over the Torqueflite platform was, obviously, the amount of forward gear. For the 68RFE transmission, Chrysler opted to change to a six-speed unit. The additional gears allowed Chrysler to add higher 1st-gear ratios and tighter shift recovery from one gear to the next. The tighter shift recovery essentially keeps the vehicle in higher averaged horsepower and torque numbers, while also adding torque multiplication.

The gear ratios were increased. as well. The new 68RFE boasts a whopping 3.23:1 first gear, compared to the 2.45:1 first gear found in the previous 47/48RE platform. Chrysler also increased second gear to a 1.83:1 versus the 1.45:1 found previously. The 68RFE was also given two overdrive gears, with 5th being .81:1 and 6th with the very deep .62:1. The predecessor had a single overdrive that was a .69:1.

The Category Kits

The SunCoast Category 68RFE transmission rebuild kits are designed and developed with intentions of taking a systematic approach to solving the issues with the 68RFE transmission.  We approach each deficiency and need from a scientific approach.

These kits offer you the same recipes that are used in our facility. We aim to offer you the most complete series of 68RFE rebuild kits available on the market today. 

The 2C Piston

The factory molded piston is prone to uneven apply which leads to excessive heat in the clutches and steels creating premature failure. In this 68RFE transmission rebuild kit we replace the factory piston with a much improved billet piece that also allows for one additional clutch further increasing surface apply area. This new billet apply pistons corrects these issues and adds matched performance.

The Solenoid Repair and Spacer Kit

The factory 68RFE transmission is known for giving false pressure switch codes. These false 68RFE pressure codes some times are the result of circuit board flexing. The 68RFE transmission solenoid block can very easily be rebuilt with this Sonnax kit. This 68RFE transmission solenoid repair kit uses both a spacer to stop the circuit board flexing and improved sealing components to prevent leakage.

The plate to serve on

There factory 68RFE transmission accumulator plate is very weak and not held securely. This problem becomes even more apparent with the addition to higher line pressure which is a very common modification performed on the 68RFE

The Torque Converter

This Category 1 SunCoast Torque Converter fits 68RFE transmissions and is engineered to handle all of your every-day DUTies. Whether you're towing a camper or hauling dirt to a job site, this torque converter is designed to improved vehicle response and give you years of solid, reliable performance. It comes with furnace-brazed fins and hardened turbine splines. The clutches in this converter are carbon-graphitic for precise and accurate lock-up. 

If you're looking to increase the performance of the factory unit and looking for a cost-effective solution this is the converter for you. This converter, while great for heavy Duty towing and hauling, is it not intended for racing.

This torque converter has a 2,000 RPM factory stall speed.

These new 68RFE transmission rebuild kits are designed with the builder in mind, we offer from mild to wild depending on what your needs are.

Suncoast Rebuild Kit with Torque Converter Features:

  • New 68RFE Thrust Washer Kit
  • New 68RFE Thrust Bearing Kit
  • 68RFE Complete Gasket and Sealing Kit
  • 68RFE Spin-on Filter
  • 68RFE Pan Filter
  • 68RFE Thrust Bearing Kit
  • 68RFE Underdrive and Overdrive piston set
  • Upgraded 2C Clutch Set
  • 68RFE Billet 2C Piston
  • 68RFE Billet Overdrive Piston
  • 68RFE Accumulator Plate
  • 4C Snap Ring Retainer 
  • Transgo 200 PSI Valve Body Kit
  • Accumulator Piston Kit
  • Zero Cavitation Filter Kit w/ stock pan
  • 68RFE GUARDIAN Multi Disc Torque Converte
  • For more information on Suncoast call us at 1-859-737-4966

Reviews

  • Why is there a core charge on a rebuild kit?

    Steven Kulbeth | 10/1/2022

    Old torque converter and some other components need to be returned.

  • Is there any other upgrades needed to use this kit?

    Arturo | 10/21/2020

    No performance upgrades required.