Rock Krawler Pro-X Top Mount Drag Link (JL/JLU/JT Rubicon and Wide Track Axles) - 2020-2023 Jeep Wrangler JL 4WD | 2020-2023 Jeep Gladiator JT

• COMPATIBLE WITH 18-23 Wrangler JL/JLU/JT OEM Rubicon and Wide Track Axles
• (Sport, Sahara, Overland Models w/ Standard Width Axles See Part Number: RK08126T)
• VALID FOR JL/JLU/JT Rubicon and Wide Track Axle Widths and Lift Heights from 3.5" or Greater.
• Requires a High Steer Front Axle Track bar Mount (OUR PN: RK08236K)
• Toughest Drag-Link on the Market
• 1.75" OD 7075-T651 Cold Finished Aluminum (built to flex)
• Brushed finish
• Left and Right hand threaded - (Designed for in-vehicle adjustment) - Just loosen your Jam nuts and adjust!
• Forged Chromoly Steel ends, completely greaseable and rebuildable
• Engineered to work with the JL and JT's Ackerman Angle
• Drilling of the passenger side knuckle is required to properly mount the drag link end.

• (2) - Forged Chromoly Steel ends, completely greaseable and rebuildable
• (1) - 1.75" Solid Aluminum Drag Link (Brushed finish)

GENERAL NOTES:

- Requires 17" or Larger Diameter Wheels.

- Requires 4.75" of Back Spacing or Less.

- If more Back Spacing is Used or Interference is Detected with Wheels, A Steering Stops adjustment will be required for Use with Proper Adjustment.