PS6480CRL
industrial injection

Industrial Injection 2004.5-2007 5.9L 3rd Gen. - PhatShaft 64 Turbo. Large Flange (43/8") - 350-600 HP - NOTE: 2006 Dodge may require Map Fooler depending on if power chip has built in Map signal conection (most downloaders do not) - PS6480CRL

Thoroughbred Sku #: IIS3642406512
Manufacturer Sku #: 3642406512

Item Options:

Prop 65:
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
Shipping Restrictions:
This part is NOT available to ship to the state of California.


$2,126.84

free-shipping-no-handling

Applications:

View All applications

VERIFY VEHICLE FIT

Product Details

Product Name: Industrial Injection 2004.5-2007 5.9L 3rd Gen. - PhatShaft 64 Turbo. Large Flange (43/8") - 350-600 HP -
Manufacturer: Industrial Injection
Manufacturer Part #: 3642406512
Thoroughbred Diesel Part #: IIS3642406512
Fitment Notes: 2004.5-2007 5.9L 3rd Gen.

The original PhatShaft is the perfect turbo for quick spool and low end performance. The Phat Shaft turbo also has the overall volume for overall torque for efficient full throttle power. The PhatShaft can be purchased with a 12 or 14 turbine housing matched with a 65mm turbine. We suggest a 12 cm turbine housing if the engine is a 12 Valve and has moderate fueling upgrades such as 300hp injectors and a camplate. If the engine has heavier fueling upgrades such as large injectors, aggressive cam plate and high rev governor springs then you will be better suited with 14cm housing. The benefit of the 14cm exhaust housing is lower Exhaust Gas Temperatures. However with the 14cm housing, you will get a slightly slower response. The original PhatShaft is available in three different compressor sizes, 62mm, 64mm and 66mm. All three compressors have extended tip technology. The waste gate is set at 40psi to prevent head gasket failure on the PhatShaft 62 and 45psi on the PhatShaft 64 and 66. All PhatShaft turbochargers are equipped with dual grooved bearings and an adjustable boost elbow.

NOTE: 2006 Dodge may require Map Fooler depending on if power chip has built in Map signal conection (most downloaders do not)

Industrial Injection Turbochargers Features:

  • Increased Performance
  • Lower EGTs
  • Designed For Towing & Daily Driving
  • 64mm Compressor Wheel
  • 65mm Turbine Wheel
  • (FMW) Forged Milled Compressor Wheel
  • 360* Thrust Bearing
  • Dual Grooved High Performance Journal Bearings
  • Drop In Replacement Turbo
  • For more information on Industrial Injection call us at 1-859-737-4966.

Reviews

There are no Questions to display