Login
My Account
My Cart
The site navigation utilizes arrow, enter, escape, and space bar key commands. Left and right arrows move across top level links and expand / close menus in sub levels. Up and Down arrows will open main level menus and toggle through sub tier links. Enter and space open menus and escape closes them as well. Tab will move on to the next part of the site rather than go through menu items.
Enter your truck info so we can recommend the right products for you.
Can't find it? Call us at 859-737-4966 for free advice.
Menu
Banners
Decals
Hats
Hoodies
Shirts
Tank Tops
Show your support with a Thoroughbred Diesel t-shirt, sweatshirt, or sticker decal.
If you drive a 2011-2026 Ford Powerstroke 6.7L, you already know these trucks are built to work. Whether you are towing, daily driving, hauling heavy loads, or running a tuned setup, your charge-air system plays a major role in how well your truck performs. One common weak point on the Ford 6.7L Powerstroke is the factory cold-side intercooler pipe.
The No Limit Fabrication Cold Side Intercooler Pipe Kit is designed to replace the factory cold-side charge pipe with a stronger, more reliable upgrade. Built with durable aluminum construction, heavy-duty silicone couplers, and stainless-steel hardware, this kit helps improve airflow, reduce the chance of boost leaks, and eliminate common factory pipe failure points.
The cold-side intercooler pipe is responsible for carrying cooled, pressurized air from the intercooler to the engine. On a diesel truck, especially one used for towing or performance, that pipe is constantly exposed to boost pressure, heat cycles, vibration, and load.
Factory intercooler piping can become a restriction or failure point over time. A cracked pipe, weak coupler, or poor seal can lead to boost leaks, reduced power, poor throttle response, and inconsistent performance under load.
The No Limit Fabrication Cold Side Intercooler Pipe Kit for 2011-2026 Ford Powerstroke 6.7L trucks helps solve those issues with a stronger design made for demanding diesel applications.
No Limit Fabrication designed this cold-side pipe kit to improve durability and boost retention compared to the factory setup. The kit features a durable aluminum pipe, heavy-duty 5-ply silicone couplers, and 304 stainless steel hardware for long-lasting performance.
The machined aluminum throttle flange includes an O-ring seal to help prevent boost leaks, while the integrated IAT sensor bung allows use of the factory intake air temperature sensor. This helps maintain a clean, direct-fit installation without unnecessary complications.
For truck owners who tow, run performance tuning, or simply want a more dependable charge-air system, this is a smart upgrade.
The No Limit Fabrication Cold Side Intercooler Pipe Kit includes several features that make it a strong upgrade for your Ford 6.7L Powerstroke:
Replaces the factory cold-side intercooler pipe
Durable aluminum pipe construction
Heavy-duty 5-ply silicone hose couplers
Machined aluminum throttle flange for a precise fit
O-ring sealed flange to help prevent boost leaks
304 stainless steel hardware for corrosion resistance
Integrated IAT sensor bung for the factory sensor
Helps remove the factory throttle plate restriction
Improves airflow through the charge-air system
Helps maintain consistent boost pressure under load
Reduces the risk of factory pipe failure
Available in raw, polished, and black finishes
Direct-fit design for straightforward installation
Made in the USA by No Limit Fabrication
You do not need a full race build to benefit from upgrading your intercooler piping. The factory cold-side pipe can be a concern on stock trucks, towing trucks, and tuned trucks alike.
If your 2011-2026 Ford Powerstroke 6.7L is used for towing or hauling, better boost retention can help keep performance more consistent when the truck is working hard. If your truck is tuned or upgraded, a stronger cold-side pipe becomes even more important because increased boost pressure can place additional stress on factory components.
The No Limit Fabrication kit is a solid choice for owners who want to improve reliability before a failure happens.
Boost leaks are one of the most frustrating issues on a diesel truck. Even a small leak in the charge-air system can cause poor performance, reduced throttle response, excessive smoke, lower efficiency, and a noticeable loss of power.
By upgrading to the No Limit Fabrication Cold Side Intercooler Pipe Kit, you are replacing a known weak point with a stronger, better-sealed system. The aluminum construction, 5-ply silicone couplers, stainless hardware, and O-ring sealed throttle flange all work together to help keep boost where it belongs.
This kit is designed as a direct-fit upgrade, making it a straightforward replacement for the factory cold-side intercooler pipe. It also keeps important factory functionality in place, including the IAT sensor location.
Available in raw, polished, and black finishes, the No Limit Fabrication cold-side pipe kit gives truck owners the option to choose the look that best matches their engine bay.
If you are looking for a Cold Side Intercooler Pipe Kit for a 2011-2026 Ford Powerstroke 6.7L, the No Limit Fabrication Cold Side Intercooler Pipe Kit is a premium upgrade built for strength, reliability, and improved airflow.
Whether you are replacing a failed factory pipe or upgrading before problems start, this kit is a smart addition to your 6.7L Powerstroke.
You can view product details, fitment information, available finish options, and current ordering information here: No Limit Fabrication Cold Side Intercooler Pipe Kit.
Product Name: No Limit Fabrication Cold Side Intercooler Pipe Kit Manufacturer: No Limit Fabrication Thoroughbred Diesel Part #: NLFINTERCOOLCOLD Fitment: 2011-2026 Ford Powerstroke 6.7L
For more information on the No Limit Fabrication Cold Side Intercooler Pipe Kit, call Thoroughbred Diesel at 1-859-737-4966.