Industrial Injection Dual Fueler Pump Kit (w/o Pump) - 11-16 GM Duramax 6.6L LML

Product Name: Industrial Injection Dual Fueler Pump Kit (w/o Pump) - 11-16 GM Duramax 6.6L LML
Manufacturer: Industrial Injection
Manufacturer Part #: 436407
Thoroughbred Diesel Part #: IIS436407
Fitment Notes: 2011-2016 GM Duramax 6.6L LML

The Industrial Injection dual fuel kit is the ultimate for performance. Efficiency is increased and EGTs reduced (constant optimum fuel pressure is maintained) while providing enough fuel to make great horsepower. Both pumps work together, each delivering half the total volume of fuel required, effectively sharing the fuel delivery load. Since each pump now shares the total fuel delivery, the drive load on the original internal fuel pump is reduced by 50% increasing pump reliability. The dual fuel kit provides seamless and consistent fuel flow for large injectors and high level tune programs that demand a high volume of fuel and optimal fuel pressure at the injectors. 

Note:

• This kit does not include a CP3 pump.
• Fits all 2011 - 2016 GM 6.6L LML Duramax
• This product will NOT work with trucks that have dual alternators. The CP3 pump is mounted where a dual alternator would be located.
• This product may not work with the EGR cooler installed. It may need to be removed.
• This product MUST be used in conjunction with custom tuning. Failure to install the correct tuning can result in engine damage.
• You must use an aftermarket lift pump with this product.

Industrial Injection Dual Fueler Pump Kit (w/o Pump) Features:

• OE Bosch Stock Injectors
• New Fuel Injector Lines
• OEM High Pressure Pump
• High Pressure Fuel Lines
• Left and Right Fuel Rails
• Filter Service Kit
• Return/Feed Lines
• For more information on Industrial Injection call us at 1-859-737-4966.