Login
My Account
My Cart
The site navigation utilizes arrow, enter, escape, and space bar key commands. Left and right arrows move across top level links and expand / close menus in sub levels. Up and Down arrows will open main level menus and toggle through sub tier links. Enter and space open menus and escape closes them as well. Tab will move on to the next part of the site rather than go through menu items.
Enter your truck info so we can recommend the right products for you.
Can't find it? Call us at 859-737-4966 for free advice.
Menu
Injection Pump
Injector
Programmers
Turbo Charger
Banners
Decals
Hats
Hoodies
License Plates
Shirts
Tank Tops
Show your support with a Thoroughbred Diesel t-shirt, sweatshirt, or sticker decal.
Thoroughbred Sku #: DSTHPODS Manufacturer Sku #: HPODS
Year/Make/Model: {{year}} {{make.Name}} {{model.Name}} Edit
$899.00
2004 - 2007 Ford F250
2004 - 2007 Ford F350
2004 - 2007 Ford F450
2004 - 2007 Ford F550
2005 - 2005 Ford Excursion
2005 - 2007 Ford E Series Van
While testing their high pressure oil pumps, Dieselsite found that the 6.0L pumps were capable of more output that was being limited by a poor delivery system. They created a new system that will allow even a stock pump to realize more output. But, if you're installing a larger volume hpop - like the Adrenaline or a dual pump setup in your 6.0L, then this delivery system is required in order to realize the full potential from the larger volume.With the HPODS for the 6.0L, modified or even stock trucks will notice a quieter engine, quicker starts, better throttle response and more power. Those with larger injectors will notice more power from their programs. You'll be able to maintain higher pressures in your hotter tunes.The 6.0L HPODS - High Pressure Oil Delivery System - will include a CNC machined distribution block, three CNC stainless steel adapters for engine connections, two custom precision hydraulic metering control devices, ICP extension harness, Stainless braided high pressure hoses with firesleeve protectant cover, bracket and hardware, and all fittings to complete the installation. None of the CNC pieces, extention harness,or flow control valves we include in our system can be purchased anywhere. We had to design these for this application. The hoses that are used are the best that can be made. They are factory built, stainless braided high pressure hoses made to withstand 5000psi constant working pressure, 20,000lb burst pressure, and 600 degrees. This is not your typical hydraulic hose. You cannot buy these at your local hydraulic shop.FAQQ: Will this eliminate the factory system? I have a current leak in mine.A: No, this is a parallel system. It feeds the heads along with your factory system.Q: Why won't this work on the 03 models?A. The 2003-early 2004 model year trucks were not equipped with the ports in the oil rails to make this system possible. If you rebuilding the engine, and you upgrade your oil rails to the later models, then you can use the HPODS.
Yes.