DieselSite Water Pump Kit w/ Coolant Filter (Thermostat Housing & Radiator Hose) - 95.5-97 Ford 7.3L

Product Name: DieselSite Water Pump Kit w/ Coolant Filter (Thermostat Housing & Radiator Hose) - 1995.5-1997 Ford Powerstroke 7.3L
Manufacturer: DieselSite
Manufacturer Part #: WPCFOBS-C
Thoroughbred Diesel Part #: DSTWPCFOBS-C
Fitment Notes: 1995.5-1997 Ford Powerstroke 7.3L

New 7.3L Ford Powerstroke water pump with Coolant Filter all in one! Finally a complete bolt-on system that utilizes the International cast iron water pump, with everything needed fit the 7.3L Powerstroke. Fits 1995.5*-1997 7.3L engines.

Special Note: If you are purchasing the new upper radiator hose with housing, please read!

This new hose routes very close to the drive belt if you are not careful in your installation. The tip is to install the end on the thermostat housing first. Do not tighten the clamp yet. If the hose looks like it will hit the drive belt, rotate the hose clockwise a few degrees at a time until the hose clears the belt. Connect the other end on the radiator and check belt clearance again. Tighten clamps.

*Many 1994-1995 7.3L Powerstrokes came equipped with IDI cooling systems. If you have a steel radiator and the cap is on the radiator, this kit will not work. You must have the later cooling system with the plastic expansion tank with the plastic radiator cap in the expansion tank.

If you have a 95-97 truck, you can use your stock "OEM" thermostat housing and upper radiator hose. If you wish to use our billet thermostat housing and upper hose, simply add it to your order.

DieselSite Water Pump Kit w/ Coolant Filter (Thermostat Housing & Radiator Hose) Features:

• Custom lifetime silicon lower radiator hose
• All plumbing hardware for conversion
• 3 Baldwin 5134 Coolant Filters
• High quality bolts for installation
• For more information on DieselSite call us at 1-859-737-4966