Login
My Account
My Cart
The site navigation utilizes arrow, enter, escape, and space bar key commands. Left and right arrows move across top level links and expand / close menus in sub levels. Up and Down arrows will open main level menus and toggle through sub tier links. Enter and space open menus and escape closes them as well. Tab will move on to the next part of the site rather than go through menu items.
Enter your truck info so we can recommend the right products for you.
Can't find it? Call us at 859-737-4966 for free advice.
Menu
Injection Pump
Injector
Programmers
Turbo Charger
Banners
Decals
Hats
Hoodies
License Plates
Shirts
Tank Tops
Show your support with a Thoroughbred Diesel t-shirt, sweatshirt, or sticker decal.
Thoroughbred Sku #: CNC424010 Manufacturer Sku #: 424010
Year/Make/Model: {{year}} {{make.Name}} {{model.Name}} Edit
$90.95
1994 - 1997 Ford F250
1994 - 1997 Ford F350
1994 - 1997 Ford F450
Product Name: CNC Fabrication OBS Passenger HPOP Line With Fittings - 94-97 Ford Powerstroke 7.3L Manufacturer: CNC Fabrication Manufacturer Part #: 424010 Thoroughbred Diesel Part #: CNC424010 Fitment Notes: 1994-1997 Ford Powerstroke 7.3L
This line is a replacement passenger side line for the '94.5 through '97.
If you have e-fuel you can also use our SD passenger line for a cleaner install.
CNC Fabrication OBS Passenger HPOP Line With Fittings Features:
We know it may be cheaper for those wanting to save some money and have a local hydraulic shop make lines, but in our 25yrs experience, it is not advisable due to the amount of thermal cycling and engine sees. Normal hydraulic is meant for normal hydraulic use, NOT on the engines. See pictures of what happens to our competitor lines. Dry rot and blistering of the hose.
INSTALLATION:
Disconnect the battery grounds before installation to avoid accidentally arc'ing the line on the glow plug relay or the alternator charging lug. Use pictures from the product webpage for routing example. The fittings are marked with numbers to match installation location (see below for reference). After installation, be sure there are no other lines/wires that are touching the lines that could potentially rub through and damage either the HPOP line or the other line that may be touching it. Use a small section of wire loom protector or a larger piece or rubber hose to wrap around the contact point. Many will remove or bend the engine eyelet on the driver side as a precaution, but it is not necessary. Sealant is not necessary, but IF you choose to use any, use Loctite 680 or Permatex 64000 retaining compound (green) only on the fittings installed in the HPOP. If you are unsure of installing yourself, seek out a competent and qualified technician to install the lines.
*REMOVE THE SPRING CHECKS IN THE PUMP UNDER THE STOCK FITTINGS, DO NOT RE-INSTALL*
HOSE IDENTIFICATION: 98.5-03 2 LINE-BOTH SIDES ARE SAME LENGTH. 94.5-97 2 LINE- PASSENGER IS LONGER OF THE 2. **FOR ANY 3 LINE KIT THE SHORTEST LINE IS THE CROSSOVER HOSE.
FITTING MARKINGS: 1- FRONT PUMP PORT 2- REAR PUMP PORT 3- DRIVER HEAD 4- 94.5-97 PASSENGER HEAD 5- 98.5-03 PASSENGER HEAD AND CROSSOVER **94.5-97 driver side fitting gets moved forward one port on the head to match 98.5-03**
Pump Fittings: 28FT/LBS • Head Fittings: 23FT/LBS • Hose Ends: 21FT/LBS