Hamilton Cams 188/220 Hot Street & Strip Cam - 89-18 Dodge Cummins

Hamilton Cams Camshaft
Fits: 1989-2018 Dodge 5.9L/6.7L Cummins (Street & Strip)

The Hamilton Cams 07-C-188/220 Camshaft for your 1989-2018 Dodge 5.9L/6.7L Cummins, has outperformed any other cam that Hamilton has tested against to date, from idle to 4,200 rpm. It is also the largest drop-in cam that Hamilton offers.

Use with 62mm or larger single turbos or larger twins. Install intake on a 99 centerline, performance springs and pushrods are recommended. If you have had your head or block surfaced, you need to verify piston to valve clearance.

For it to be "drop in" on a 12v you will need no more than .018" piston protrusion and at least .055" valve face depth with a standard head gasket and a 99 intake centerline. On a 24v you will need no more than .018" piston protrusion and at least .038" valve face depth with a standard gasket. If you do not meet the minimum requirements for piston to valve clearance, don't worry, you can still run an oversize headgasket or cut valve reliefs.

Features:

• For Larger Singles & Compounds
• Best All-Around Performance Camshaft