Greatly
increase the horsepower, torque and driving range of your turbo-diesel
rig with Superchips’ all new Digital Propane Injection
system! When propane is injected into a turbo charged diesel
engine there is a tremendous increase in power and torque!
Power isn’t the only benefit as you’ll also gain
travel range in your rig with the addition of clean burning
propane. The advanced controls and design of the Superchips
DPI system will safely produce up to 75 more horsepower and
150 lb-ft of torque at the rear wheels! So, how is this power
made? Each cylinder of a diesel engine always draws in the maximum
amount of air on the intake stroke. Engine speed is determined
by controlling the amount of diesel fuel that is injected into
the cylinder. At lower engine speeds, a small amount of fuel
is added to the air in the cylinder, while at higher speeds,
more fuel is added to the same amount of air resulting in an
increased combustion event to produce more power.
Note that the same amount of air is present in the cylinder. It’s
the diesel fuel that varies to determine engine speed. Whatever air
that does not get burned in the combustion process is simply pushed
out on the exhaust stroke. This is where the Superchips DPI system
comes in to play.
Each Superchips DPI kit
is mapped at the factory for its specific application. Superchips
uses our own Pro-Data+ software to control and monitor the DPI system.
This software is easy to use on a Windows based PC and allows you
to adjust the amount of performance you want to achieve, as well as
program certain parameters as to when the propane is injected (such
as the boost pressure). Another useful tool is the ability to data-log
system performance to aid in tuning the system or troubleshooting.
You can even download this software at www.superchips.com
or www.msdignition.com for
free!
BENEFITS
INCLUDE :
Up
to 75 hp and 150 ft/lbs of Torque
- Power There When You Need It!
Safest Propane System On The Market
- Worry Free Power With Parameter Monitoring Built In.
Fine
Tune Your Rig With Data Logging Technology
- Don't Just Guess What Your Rig is Doing...Know.
Increased
Fuel Economy
- Extend Travel Range Between Fuel Stops
Made
By Superchips
- A Name You Can Trust
Free
next day air
when you buy from Thoroughbred Diesel. We are a authorized MVP
Superchips dealer.
Tuners
and Modifications
A popular upgrade to turbo-diesel trucks is an aftermarket
chip or tuner. The Superchips DPI system will work hand-in-hand
with our Max MicroTuner
or FLASHPAQ
to produce even greater results. Adding propane to a vehicle with
a tuner installed will still produce power gains, however the additional
improvements will be less than on a stock vehicle. This is because
the modified program is already using more of the available air in
the cylinder. The end result will still be greater, but it will not
be the sum of the individual components.
KITS
OFFERED FOR THE FOLLOWING DIESEL TRUCKS:
Diesel
Trucks
Part
#
Installation
Instructions
Chevy/GMC
Duramax - ’01 - on
4850
Ford
Powerstroke, 6.0L - ’03 - on
4800
Ford
Powerstroke, 7.3L - ’94 - ’98
4815
Dodge
Cummins HPCR - ’03 - on
4870
Dodge
Cummins 12 Valve - ’94 - ’98
4871
Dodge
Cummins 24 Valve - ’98 - ’02
4875
When
propane is injected into a turbo charged diesel engine there
is a tremendous increase in power and torque! Power isn’t
the only benefit as you’ll also gain travel range in your
rig with the addition of clean burning propane.
Superchip’s all new Digital Propane Injection system is
the safest propane system available. That’s because Superchips
uses a closed loop ECM that constantly monitors the engine parameters,
such as propane vapor temperature, over-boost and of course
rpm, before any propane is allowed to be added to the engine.
If the engine management parameters are not met, no propane
is used. Or, if you simply do not want to use the system at
certain points, it can be disabled with the flip of a switch.
This system also has the capabilities to data-log a number of
engine parameters. It uses our Pro-Data Plus software to adjust
parameters.
Each DPI™ system is programmed for each application so
there are no jets to drill or external adjustments required.
Supplied with mounting brackets and installation instructions.
Note: The propane tank must be purchased separately. The tank and
installation must meet Federal DOT and NFPA 58 requirements as well
as state and local requirements that may apply. Information is available
from your local propane professional.
FEATURES
AND BENEFITS
Greatly increase
horsepower and torque.
Extended
travel range between fuel stops.
ECM monitors
the engine parameters for safe and proper operation.
Data log
engine parameters to monitor system performance.
System can
be turned Off with a switch if desired.
When you’re
towing a heavy load the new Superchips DPI™ system will give
you the extra oomph to get up and over the toughest grades. Not only
will the power be increased but you’ll be able to run further
between fuel stops!
Superchips’s
all new Digital Propane Injection system is the safest propane
injection system available. That’s
because we use an advanced closed loop ECM that constantly monitors
the engine parameters, such as throttle
position, over-boost conditions, engine rpm and propane temperature
before any propane is allowed to be added to
the engine. The temperature of the propane is very important.
If the propane is below 0°F the system will not turn on.
This prevents liquid propane from being injected which could
cause over fueling and engine damage. This is a very
important safety feature in cold climates. If the engine management
parameters are not met, no propane is used. Or, if you simply
do not want to use the system at certain points, it can be disabled
with the flip of a switch.
Another important feature is data-logging capabilities. If you
need assistance in troubleshooting the system, the
ECU can record up to 30 minutes of information. This data can
then be reviewed and analyzed.
Each DPI system is programmed for individual applications so
there are no jets to drill or external adjustments
required. Once the kit is installed, you will always have the
correct performance gains from your truck in the safest,
most efficient manner possible.
SAFETY
FEATURES:
Progressive
fuel cutoff based on engine rpm to prevent engine over rev.
The propane
temperature is constantly monitored to ensure that the propane
is always in a vapor state
when it’s injected. This prevents over fueling and engine
damage.
Fuel flow
is also corrected for temperature. By monitoring fuel temps
we can maintain a consistent fuel
curve during various loads and coolant temperatures.
Fuel flow
is not determined by airflow, therefore a restricted air filter
will not result in over-fueling.
The ECU has
a map of propane versus manifold pressure and throttle position.
If certain parameters are
out of specification, the system will not be activated.
Being able
to data-log system performance provides an important and useful
tool in vehicle performance.
