Diesel is a MBRP Factory Authorized Online Retailer
with the confidence in knowing that our MBRP products
are backed up by the Manufacturer.
Fast FREE Shipping on all MBRP Exhaust.
inch Aluminized Single Turbo Back Exhaust System with Tip- Installer
Ford Powerstroke 7.3L (1999-2003) Excursion
The 7.3L Powerstroke
truck really respond well to our full turbo back exhaust systems.
Each system consists of a 4" downpipe, 4" intermediate
pipes, a high flow MBRP Inc diesel muffler with a 4"
tailpipe. Finishing off the system is a mirror polished, show
quality 5" diameter exhaust tip.* High flow is the key
to making power on the Powerstroke and these MBRP Inc systems
deliver high flow. With our direct fit turbo flange, full
mandrel bent tubing and one piece downpipe installation is
a breeze. This system is a must for trucks that are, or intend
to run an upgraded air intake system and chip. Horsepower
and torque gains along with better fuel economy can be noted
as well as a drop in EGT (exhaust gas temperature).
The turbo back type exhaust system mounts directly to the
turbo and provides maximum diameter as well as reduced band
degree angles and mandrel bent pipe. The objective is to provide
the absolute lowest exhaust gas temperatures, maximum exhaust
flow, torque and horsepower possible.
a rich, mellow exhaust note
with common hand tools
improve fuel economy by 1-2 mpg
torque and horsepower
Turbo Back System
polished T304 stainless steel tips
Best Systems Start With the Best Materials
Built from heavy duty aluminized steel our Installer Series
performance exhaust systems offer a value price without compromising
on the quality built into every component. While the seams are
a major point of rust through with some budget systems our fully
sealed tubing adds years to your system.
You count on your truck to tow all of your gear to where you
want it. With your MBRP Inc. performance exhaust you can make
that happen with up to 18 more horsepower and 28 lbs.-ft.
more torque. Give your truck more pulling power and much improved
throttle response with an MBRP Inc. diesel exhaust system.
Our systems are so much more efficient, it will be easy to
see what your truck can really do.
The secret to getting more out of your diesel engine is to
give it lots of cool, clean air. The only way that you can
get fresh air in is to get the hot air out. From the spiral
louvered high flow muffler to the fully mandrel bent tubing
to minimal bend degree angles, your MBRP Inc. performance
system gets exhaust out fast. Drop exhaust gas temperature
by up to 200F and set the stage for all the performance you
want. An MBRP Inc. performance exhaust system is the starting
point to getting the most from cold air intakes, programmers,
modules and downloaders.
MBRP Inc. systems are as much fun to install as to drive with
on your truck. Bolt-on, no weld design makes installing this
on your truck a no hassle one and a half to two hour project.
Everything is direct fit to the OEM hangers and you get all
the clamps and parts you will need, all in one box, no matter
what configuration of truck you have.
Performance is one thing but at MBRP Inc. we believe that
appearance and sound is just as important. Every MBRP Inc.
performance exhaust system has been specifically tuned to
get the optimal sound from your pickup. With our MBRP Inc.
brand etched on the tips and our unmistakable styling, there
is no question that you have the hottest exhaust on the road
September 1, 2015 through December 1, 2015
in rebate Effective September 1, 2015 through December 1, 2015
any MBRP Pro Series or BLK Series exhaust
system over $200.00 and receive a $75.00 MBRP Inc.
any MBRP XP Series or TD Series exhaust
system over $200.00 and receive a $50.00 MBRP Inc.
any MBRP Installer Series exhaust system
over $200.00 and receive a $25.00 MBRP Inc. issued