The horsepower
settings have a modified "Torque management" ( TQM ).
The throttle response is greatly improved but is set to a safe limit.
With "Safe" I mean safe for your tranny and rest of the
driveline.
SW #
1 : 40 Hp increase
SW #
2 : 70 Hp increase
SW #
3 : 100 Hp increase
Tested
on stock trucks on a Dyno.
Stock means just that. Stock! Even the air filters were stock...
The trucks were S T O C K, even the wastegate settings! We checked
the "baseline" ( the stock truck Hp at the rear wheels
) twice in a day in order to be sure about our findings. The above
declared HP numbers are all rounded down to the closest number.
No trace
is left in the ECM!
I herby CLAIM that SmartyCR is the FIRST AND ONLY downloader that
does not erase any of the stored data in the ECM. Smarty does NOT
leave any electronic footprints in the ECM or any other electronic
module in the truck. Smarty does NOT set ANY codes once the ECM
is set back to stock. Smarty does NOT need to have fuses pulled.
No matter what
the competition claims , in one way or another they're ALL detectable.Smarty
is NOT!
Yet, Smarty
can not do one thing for you. Fix what others have broken. Smarty
can not restore a key on counter that another
downloader has erased . Smarty can not fix VIN# troubles caused
by other products. If your Check engine / ABS light is on
because another product has screwed your ECM, Smarty can not fix
it, the other guy HAS to...
ABS
/ Speedo recalibration
The tire height can be adjusted up to 44" in increments of
10 tenth of an inch in just a couple seconds. Of course, Smarty
needs to be VIN# locked to the truck in order to get into the ABS
adjustment section.
DTC
Code reader
The name says it all. You can read and erase codes. Codes are displayed
also in plain English. That's old news by now. Smarty S-03 was the
first one to provide that utility, others found the idea to be a
good one too. (Smarty does erase ABS codes too but does not display
them )
ECM
update speed
Faster than anything else on the market! Again we've done our homework
on the protocol. Less than 5 minutes. Three times
faster than a Star-Scan diagnostic tool or competitor.
We have developed
our own bootloader in order to not have to pull fuses should an
update become interrupted for any reason.
All you have to do is to turn the key off / key on Smarty does everything
else on it's own.
Updates
The CaTCHER softwares as they are today are only a starting point.
Expect major news in future. We're for your feedback,
opinions, likes, dislikes... We will make Smarty do what YOU want,
TOGETHER.
Pictures
of our new Shop
