The EZ offers a
quick 10 minute installation that requires no expensive mechanic
labor, no drilling, and no computer downloading. Simply plug
the Edge EZ into 2 stock connections and you're ready to go.
The EZ provides
real power - you can switch between 3 power levels to add
up to 65 HP. The EZ safely provides power to help eliminate
The EZ is also
tuned with a special fuel economy level* that improves the
atomization of fuel, which in turn allows Edge to add power,
while at the same time delivering between a 5-10% improvement
in MPG when driving in level one. Add to that the EZ's price
point and you have the ultimate value on the performance market
There is not another product on the market today that delivers
power so safely and so economically, and at the same time
is so easy to install.
The following power
gains are representative of an actual test vehicle. These
gains were measured on a SuperFlow Dyno at an altitude of
4400 ft above sea level, and represent power delivered to
the rear wheels of the test truck. The only modification made
to the test truck was the addition of the Edge EZ module.
Power gains may vary based on vehicle and geographical location.
65 HP and 180 ft lb Torque
1: 20 Horsepower - 45 Foot Pounds
Level 2: 30 Horsepower - 77 Foot
Pounds of Torque
Level 3: 65 Horsepower - 180
Foot Pounds of Torque
*Increase in fuel
efficiency varies based on driving style.
Edge recommends the use of gauges when using any performance
Edge EZ allows maximum fueling at full turbo boost and provides
an additional 65-rear wheel horsepower, an additional 185
foot pounds of torque and installs in minutes. Simply plug
the EZ connectors into the ECM Data Link connection and MAP
sensor. There's no need to unplug the Bosch fuel injection
pump connector, it is EZletely weatherproof and mounts easily
under the hood.