The
Edge Accessory System (EAS) was created with future expandability
in mind. The architecture of the EAS allows users to connect
multiple accessories, daisy-chain style, to the CS and CTS platform.
The ability to daisy-chain multiple accessories using the EAS
allows users to monitor and display dozens of parameters on
a single device.
Add up to 16 additional sensors with the EAS Universal Sensor
Input. Then setup, configure, and customize those sensors through
Edge’s MyStyle software package. The Edge MyStyle software
will recognize any Universal Sensor Input that has been connected
to your CS or CTS and allow the user to change the PID name,
gauge name, description and units. The user can choose from
a number of preconfigured sensors or enter in a custom look-up
table to translate the input voltage to the measured parameter
value and units.
Sensors and other EAS options from Edge include the following:
Accessorize
your vehicle with EAS today and unlock the features and information
you've been craving.
EGT
Accessory for CS and CTS (non-expandable)
$99.00 Part # 98601
Fits: Edge CS & CTS Products
For
those diesel customers not interested in future expandability
and optional future accessories Edge offers a simple, inexpensive
non-expandable EGT sensor that allows users to monitor critical
exhaust gas temperatures to ensure added power is not creating
excessive heat which in turn can cause engine damage.
EAS
Expandable EGT (with or without Starter Kit)
NOTE: *Starter kit is included with Juice w/Attitude
Fits: Edge CS & CTS Products
The
EGT probe is a sensor that allows users to monitor critical
Exhaust Gas Temperatures to ensure added power is not creating
excessive heat which, in turn, can cause engine damage. With
the EAS system a user can connect multiple EGT sensors to monitor
temperatures in different locations and compare readings to
be even more precise.
*EAS
Starter Kits are only available to work with the CS and CTS
product lines. In order to use the EAS accessories you must
have an EAS Starter kit (part # 98602). EAS Starter kits come
with all Juice w/ Attitude CS and CTS products and the EAS
Starter Kit w/ Expandable EGT (part # 98603).
A
turbo timer is a device designed to keep an engine running for
a pre-specified period of time or a until a specific temperature
is reached in order to automatically execute the cool-down period
required to prevent premature turbo wear and failure. This also
allows the lubricating oil from the engine to circulate properly
so the turbine won't burn the lubricating oil that would otherwise
be trapped within the charger with the turbine rotating at high
speed.
*Turbo
timers are only available to work with the CS and CTS product
lines. In order to use the turbo timer you must have an EAS
Starter kit (part # 98602). EAS Starter kits come with all
Juice w/ Attitude CS and CTS products and the EAS Starter
Kit w/ Expandable EGT (part # 98603).
EAS
Starter Kit (one required to start EAS system)
NOTE: This item comes with all Juice with Attitudes
$36.00 Part # 98602
Fits: Edge CS & CTS Products
The
Edge Accessory System (EAS) was created with future expandability
in mind. The architecture of the EAS allows users to connect
multiple accessories, daisy-chain style, to the CS and CTS platform.
The ability to daisy-chain multiple accessories using the EAS
allows users to monitor and display dozens of parameters on
a single device.
*EAS
Starter Kits are only available to work with the CS and CTS
product lines. In order to use the EAS accessories you must
have an EAS Starter kit (part # 98602). EAS Starter kits come
with all Juice w/ Attitude CS and CTS products and the EAS
Starter Kit w/ Expandable EGT (part # 98603).
EAS
UNIVERSAL SENSOR INPUT (5 Volt)
$149.00 Part # 98605
Fits: Edge CS & CTS Products
The
EAS Universal Sensor Input provides the ability to read any
0-5 volt signal and translate that signal a meaningful value
for display on the Edge CS or CTS. This means you can add custom
temperature, pressure, Air/Fuel and even Travel/Position gauges
to your Edge CS and CTS!
EAS
PRESSURE SENSOR 0 - 100 PSIg 1/8” NPT
$129.00 Part # 98607
Fits: Edge CS & CTS Products
Edge’s
EAS Pressure Sensor is a 0 - 100 PSIg 1/8” NPT sensor
that plugs directly into the Universal Sensor Input system (p/n
98605). Edge’s Pressure Sensor comes equipped with the
proper wires and connectors to plug right into the Universal
Sensor Input system saving time and money on cutting, splicing,
and crimping wire terminals to connect the sensor. Use Edge’s
Pressure Sensor to monitor data such as Boost PSI, Fuel Rail
Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post
Intercooler Pressure and many more.
Tolerance:
+-1.5% Full Span over temperature range of -20C to 85C and
+-2.4% Full Span over temperature range of -40C to 135C.
EAS
TEMPERATURE SENSOR
$48.00 Part # 98608
Fits: Edge CS & CTS Products
NOTE:
(EAS Starter Kit Cable Part #98602 and EAS Universal Sensor
Input Part # 98605 required)
The EAS Temperature Sensor is a -40°F to 300°F 1/8”
NPT supplied with the connectors to plug directly into Edge’s
Universal Sensor Input System. Using Edge’s Temperature
Sensor you can monitor Transmission Temp., Differential/Axle
Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp.,
Pre and Post Intercooler Temp., and many more. Use this in conjunction
with the Universal Sensor Input and the CS or CTS monitor to
allow you to view critical temperatures with the most state-of-the-art
product on the market today.
EAS
AMBIENT TEMPERATURE SENSOR
$36.00 Part # 98610
Fits: Edge CS & CTS Products
NOTE:
(EAS Starter Kit Cable Part #98602 and EAS Universal Sensor
Input Part # 98605 required)
If your vehicle is not equipped with an outside temperature
sensor then this is a must have! The EAS Ambient Temperature
Sensor is a -40°F to 230°F Waterproof 0.2” diameter
sensor ready to plug into Edge’s Universal Sensor Input
system. Now you’ll never wonder what outside air temperature
is again!
REPLACEMENT
Thermocouple (EGT Probe) $49.99Part
# 4000800 Fits: Any Juice with Attitude
This
is a REPLACEMENT thermocouple (EGT probe) that fits all Juice
with Attitude kits. This item will REPLACE the EGT Probe on
your existing Juice with Attitude.
CTS
Dash Pod Adapter Kit
$17.50 Part # 98003
Fits: Required on Edge CTS to use Custom
Mounts
Edge
offers a wide variety of custom dash mounts for various vehicle
makes and models. This adaptor allows the CTS to fit in these
custom
dash mounts.
