|
The Juice module is an add-on Engine Control Module
for the Cummins engine that offers additional features not available
with the factory setup. Since it is an add-on ECM, it uses all the
factory data and then enhances the factory settings to optimize
your truck's performance.
The
Juice features engine temperature monitoring and power increases
from the Juice module as the engine reaches operating temperature.
With three selectable power levels via an in-cab position switch,
the Juice module offers a large power increase over stock throughout
the RPR range, but the power is more noticeable in the midrange
RPMs. This greatly improves driveability and towing performance.
Transmission downshifting is greatly reduced, especially while passing
or towing.
The Juice also
regulates power delivery and timing based on engine temperature.
This means that while the engine temperature is below 140 degrees
Fahrenheit, no additional fueling or timing is delivered. Once engine
temperatures reach 140 degrees, the module begins delivering fuel
at 25% of the calculated additional fuel, and the percentage increases,
until at full engine temperature the Juice delivers 100% of the
calculated additional fuel. At full engine temperature the Juice
also modifies timing.
The Juice alone
provides the following power gains with toggle switch:
Level 1: 25 Horsepower - 70 Foot Pounds of Torque
Level 2: 40 Horsepower - 90 Foot Pounds of Torque
Level 3: 65 Horsepower - 160 Foot Pounds of Torque
When the Juice
module is used without an Attitude or A2 monitor the Juice will
NOT read EGTs.
Note: The Juice
with Attitude for the 6.7L Dodge Cummins is designed specifically
for a standard truck platform and does not work on the chassis cab
version.
Not legal for
sale or use in California on pollution-controlled motor vehicles. |
Dodge Juice Module