|
The Juice module is an add-on Engine Control Module
for the Cummins Engine that offers additional features not available
with the factory setup. Since it is an add-on ECM, it uses all the
factory data and then enhances the factory settings to optimize
your truck’s performance.
The
Juice features engine temperature monitoring and power increase
from the Juice module as engine reaches operating temperature. With
three selectable power levels via an in-cab position switch, the
Juice module offers a large power increase over stock throughout
the RPR range, but the power is more noticeable in the midrange
RPM’s. This greatly improves driveability and towing performance.
Transmission downshifting is greatly reduced, especially while passing
or towing.
The Juice also
regulates power delivery and timing based on engine temperature.
This means that while the engine temperature is below 140 degrees
Fahrenheit, no additional fueling or timing is delivered. Over 140
degrees, the module begins delivering fuel at 25% of the calculated
additional fuel, and the percentage increases, until at full engine
temperature the Juice delivers 100% of the calculated additional
fuel. At full engine temperature the Juice also starts modifying
timing.
The Juice alone
provides the following power gains with toggle switch:
Level 1: 25 Horsepower - 80 Foot Pounds of Torque
Level 2: 40 Horsepower - 120 Foot Pounds of Torque
Level 3: 80 Horsepower - 200 Foot Pounds of Torque
When the Juice
module is used without an Attitude or A2 monitor the Juice will
NOT read EGTs. |
Dodge Juice Module