It only
took 1 engineer to reverse design the BD Fuel Stop Plate.
BD offers 6 different ramp designs of the Fuel Stop Plate
that result in 30 to 150 hp and 70 to 300 lbs of torque increase
and a calibrated boost tube orifice improves your turbo performance.
The Governor
kit (new)opens up the engine rpm. Power will control the maximum
rpm attainable. If you have power we can reach 3800 rpm. This
is not an easy install; you may want to just order an exchange
pump after you have determined this is beyond your eyesight
and steady hand.
BD suggests
a 14 cm turbine housing if you are going beyond the 250-hp
level. The increased exhaust flow requires a larger turbine
housing and should have a larger exhaust system for peak performance.
We recommend
this kit be installed by one of BD’s dealers. It requires
opening up the fuel pump and precise setting of the plate
to insure the proper adjustment to prevent over fueling and
damage to the engine.
Emission
testing and certification that meets with California Air Resource
Board is constantly being worked on. We do offer products
that have CARB certification and others that are for RACE
only. Please advise us of your needs.
