High silicone ductile iron casting with internal
wastegate. To lower Exhaust Gas Temperatures (EGT's), the
turbine outlet is 4.0" compared to the OE 3.0" outlet.
The CNC machined wastegate actuator is set to 40 PSI. The
inducer and exducer measure 74mm and 64mm respectively.
The housing is cast from A356 T6 aluminum and incorporates
a ported shroud to eliminate turbo bark and compressor surge.
The wastegate actuator mounts to a bracket cast into the housing.
The inducer and exducer measure 58mm and 76mm respectively.
Replacement: A cast ductile iron turbine outlet allows
this turbo to fit both the 12V and early 24V engines with
no modifications. The turbine outlet is machined to accept
an EGT thermocouple to monitor temperatures. All necessary
gaskets and clamps are included for a trouble free installation.
is a "Race Only" product used solely for competition.
Its use is limited to closed-course and open-course racing
that is formally sanctioned by a recognized racing organization.
Any other use including recreational off-road use, could be
in violation of local, state and federal laws.