Hot Seller

Edge Products - Brass Boost Elbow - 94-04 Dodge Trucks - 6000019

Thoroughbred Sku #: EDG6000019
Manufacturer Sku #: 6000019

Your Selected Vehicle Does Not Fit, Please Select a Vehicle

Select a Vehicle

Selected Vehicle

Year/Make/Model: {{year}} {{make.Name}} {{model.Name}} Edit

Item Options:

Prop 65:
WARNING: Cancer & Reproductive Harm -



View All applications


Product Details

Product Name: Edge Products Brass Boost Elbow
Manufacturer: Edge
Manufacturer Part #: 6000019
Thoroughbred Diesel Part #: EDG6000019
Fitment Notes: 1994-2004 Dodge Trucks

The installation of the brass elbow permits turbo boost pressures of greater than 20 psi without the waste gate opening. This goes in the waste gate feed line on the turbo, which is located on the face of the turbo. Boost elbow is highly recommended for all trucks with a stock turbo looking for more boost, especially those with fueling modifications.


  • Inexpensive way to increase boost
  • No need to adjust, unit is pre-set from factory
  • Easy to install
  • Calibrated to provide 50% more turbo boost on initial acceleration
  • Due to the increase of more constant boost it is suggested that a performance air filter be installed in the vehicle to accommodate the extra flow.


  • Will this work on a 1999 with an auto transmission?

    Michael Jose | 2/24/2023


  • Will this fit a early 2004 5.9 with a 48re auto

    Maxwell Deal | 2/8/2023

    Fits HX35, HX40, s300 etc. (does not fit the HY35 with the hard line)

  • Hello, I just had a question. answer when you can. Do yall by a chance know if this product will work on a 2004.5 24 valve cummins? if you know please let me knowthank you,Caleb Herman

    Caleb Herman | 10/18/2022


  • Will it fit a 2002 24 valve auto trans?

    Awstyn | 8/15/2022

    Will not work on 01-02 auto trucks.

  • it says it is preset, what is it preset to?? kinda seems like important information

    Denise Sokolov | 7/7/2021

    Elbow will allow you to build around 10 psi more boost than stock.

  • I'm told it will not fit a 2000 with an automatic. Some things I read says it will just not a 2001. When I look at mine it come out straight with 1/8 pipe thread but there is plenty of room if I added a hose a few inches longer. If the elbo is 1/4 pipe thread there is still room for an adapter. Is there another reason it will not work?

    Dave Carrow | 4/10/2021

    1994-2004 Dodge Cummins with Manual Transmissions.

  • I have a 98 cummins 12 valve with 400000 on it. Will it harm the motor any or possibley raise boost to much where it might blow a head gasket. Just looking for a little more pulling power. The truck is a used for welding so I have some weight on it. I'm right at 8800 lbs.

    Ed | 9/4/2020

    No, driving style will be the key factor.

  • Will it hurt to put it in a stock 1999 5.9

    Wilmer Asbury | 4/20/2020

    No, it will just let you build more boost than stock.

  • If I add the boost elbow to my 01 3500 cummins would it cause a check engine light to come on or anything. Also if I add this elbow would I need to add a boost fooler along with it?

    Brandon Collins | 1/19/2020

    The boost elbow should not cause a check engine light. No, the boost elbow is the boost fooler.

  • On a stock 5.9 24 valve Cummins would the increase in boost due to the edge elbow be to much for my stock Cummins parts? I only have a new intake manifold and a edge comp box

    Jaden Ahrlett | 12/29/2019

    No, it will raise the amount by 10 psi and should not be harmful to the motor.

May We Recommend