dpf upgrade kits

Shipping restricted for: CO,CA

RaceMe Ultra W Flo Pro EGRD & 4'' SS Turbo Back No Bungs for 10-12 Cummins

Thoroughbred Sku #: KITRACEMEULTRA-SS1848-213000
Manufacturer Sku #: RACEMEULTRA-SS1848-213000

Your Selected Vehicle Does Not Fit, Please Select a Vehicle

Select a Vehicle

Selected Vehicle

Year/Make/Model: {{year}} {{make.Name}} {{model.Name}} Edit


+ Free Ground Shipping

Product Details

RaceME ULTRA Dodge / Ram Cummins Diesel 6.7L (2007.5-2016)

RaceME Ultra Supported Models:

All Pickup Models 2007-2016


Cab & Chassis Models 2007-2010 without DEF

Cab & Chassis Models 2011-2016 with DEF


  • RT (Real Time) Programming fully supported for all trucks 2010- 2016.   The 2007.5 to 2009 only support real time with the use of Warp tuning.  (not supported with box tunes). Will allows customer to program truck on the road to every stage he wants, with different adjustments in duration, timing, VGT and rail pressure to the level he wants. Simply by pressing the "Program" button the adjustments are instantly available and programmed.
  • Transmission tuning. Complete 68RFE transmission tuning.
    Complete means:
    1) Raised line pressure in all Fwd gears AND during the shifts.
    2) Increased shift firmness for less slip in the clutches.
    3) Changed shift points at WOT in all gears @ 3000 RPM.
    4) 6th gear unlock and downshift to avoid the massive torque and make the transmission last longer.(Not for Aisin equipped trucks)
  • Modern Design with Touch Screen Functionality And Range Of Gauge Monitoring Options
  • Includes Necessary Hardware For Unlocking 2013+ Which Is Done As Part Of The Program

No Special / Complicated Unlock Procedures Required, Connect Necessary Cables And Install Tune!

Tune Uses Latest High Speed Transfer, Usually Takes 7 Minutes Max!

  • Monitor Comes With User Defined Layouts/ Dashboard
  • Memory Supports All Files From 2007 And On
  • No Reloading / Changing Files Required For Installing On Different Year Models, All Inclusive
  • Updateable Free via Latest Software Downloads From Our Website
  • Updatable With Customer Friendly Update Using MicroSD, Simply Load The Update File Onto Card, Reinsert And Update Unit
  • Disables Entire EGR By Turning Off Without Removing Any Parts ( Hard Part Removal Recommended And Supports Removal Of Entire EGR System Including Valve And Cooler With No Trouble Codes)
  • Read / Clear Diagnostic Trouble Codes
  • Disable The DPF/DEF System And ALL Related Sensors No Sensors Required To Be Plugged In Or Installed In Race Exhaust

(DPF = Diesel Particulate Filter)

(DEF = Diesel Exhaust Fluid. also referred to as Urea)

  • Late Injection Events (Post Injection) Is Disabled On All Tunes
  • Speedometer Recalibration For Use Of Non-Stock size tires
  • Remove / Adjust Top Speed Limiter
  • Tune engine HP increases of up to 200HP  (NOTE: Power increase maximum differs between model years)
  • EGT sensor optional accessory to monitor accurately up to 2200 degrees F
  • Stage 0 has stock power without DEF/DPF/EGR and no options, simply stock for the careful user
  • End User Customizable Injection Timing For Better Economy And/Or Power
  • Special ECM Recovery Functions In The Event Of A Programming Sequence Being Disrupted Or Ending With A Fault

         Warning **Use the tuner only after removing DPF System** Warning


****Warning**** If DPF Codes Or System Warning Present Use The Tuner Only After Removing DPF System

****Warning****  / Clearing DPF Related Counters (see our FAQ section)

****Warning**** Product does not support the removal of the DEF tank and its associated components!!


Flo Pro EGR Delete

Flo~Pro EGR & Cooler Race Kit
Fits: 2007-2017 Dodge Cummins 6.7L (Pickup Only)
Mfg Part # 213000
Our Part # FLO213000

NOTE: Any product that requires the removal of ANY emissions control device is strictly prohibited and is intended for closed course racing only for non-registered vehicles.



Flo Pro Exhaust

409 SS Single Race Turbo-Back Exhaust System (SS1848) by Flo-Pro®. Exhaust Type: Turbo-Back. Exhaust Tubing Material: 409 SS. Main Tubing Diameter: 4". Designed with meticulous attention to the smallest detail this premium product will meet your needs and expectations. This FLO~PRO product is manufactured from top-grade materials to provide maximum durability and ensure long lasting service life.


Exhaust Type: Turbo-Back
Exhaust Tubing Material: 409 SS
Exit Configuration: Single
Main Tubing Diameter: 4"


Made from premium materials
Guarantees exceptional durability
Ensures long lasting service life


There are no reviews for this product yet. Be the first!

Write a Review

Read Review

Spell Check
No videos are available.