dpf upgrade kits
KIT109005-877NM-302201

Shipping restricted for: CO,CA

H&S XRT Pro W Flo Pro EGRD & 4'' DP Back No Muff 11-14 6.7L C&C Powerstroke

Thoroughbred Sku #: KIT109005-877NM-302201
Manufacturer Sku #: 109005-877NM-302201

Your Selected Vehicle Does Not Fit, Please Select a Vehicle

Select a Vehicle

Selected Vehicle

Year/Make/Model: {{year}} {{make.Name}} {{model.Name}} Edit

$1,100.63

+ Free Ground Shipping

Product Details

H&S Performance XRT Pro DPF Delete Race Programmer

The XRT Pro is the solution that can meet almost anyone’s budget and needs. This product comes with all of the tuning capability of the Black Maxx / Mini Maxx, but without the digital gauges and automatic defuel capability.

Standard Features:

These are generic features that come on all XRT Pro Tuners.

  • Comes preloaded with DPF Present and DPF Removed capable tuning
  • Allows removal of the DPF system and ALL related sensors (nothing needs to go into the race exhaust or even be plugged in)
  • Precisely tune engine with HP increases of 0-250HP (dependent on application, see below chart)
  • Instantly shift power levels on the 6.7L  Dodge, 6.4 Ford, 6.0 Ford, and 6.6 LMM (other models take up to 12 minutes)
  • Speedometer recalibration for use of non-stock size tires or gearing
  • Enable / Disable factory "special features". Check here for more information
  • Remove / Adjust top speed limiter
  • Allows removal of the entire EGR system including cooler with no trouble codes (6.7 Cummins, 6.4 Powerstroke, 6.0 Powerstroke, 6.7 Powerstroke)
  • Turn off the EGR system without removing ANY parts
  • Read / Clear Diagnostic Trouble Codes
  • Custom Tunes are FREE to download.
  • Internet updateable w/included Micro SD Memory Card and USB Adapter.
  • Allows for use of aftermarket turbo kits with no trouble codes (Only 6.7 Cummins)
  • Transmission tuning included on the 6.4 Powerstroke
  • Made in the USA
  • H&S Overdrive transmission software available to add to 6.7L Dodge engine tuning

 

Ford 6.7L

  • Stock HP
  • Mild: 50 HP
  • Wild: 100 HP
  • Hot: 150 HP

 

Flo Pro EGR Delete

Flo~Pro EGR Delete Kit w/ Stock Pyro Port
Fits: 2011-2014 Ford PowerStroke 6.7L
Part # 302201
  • Allows removal of the EGR assembly
  • Clean up the engine bay
  • Remove unnecessary heat retention under the hood
  • Comes complete with step by step instructions and color pictures
  • The Manifold block off plate is also a great location to install an aftermarket pyrometer.
  • With the reverse head design on the scorpion, it makes it very difficult to find a place to install a pyrometer. This location will allow you to use an aftermarket pyrometer without drilling or modifying any factory parts.
This EGR kit is designed to remove the EGR Assembly from your 2011-14 6.7L PowerStroke. This will remove the EGR Cooler, manifold pipes, coolant lines, and all EGR related electronics from your truck. This product is OFF ROAD ONLY! It will set a check engine light if not used properly.. Comes with all necessary block off plates, plugs, clamps, etc.

Flo Pro Ford 6.7L Kit Contents:
  • One Exhaust Manifold Block-off Plate
  • One Intake Block-off Plate
  • One Coolant Block-off Plate
  • One 1" Hose Clamp
  • One Straight Barbed Fitting
  • One Vacuum Cap
  • One Pressure Sensor Bracket
  • One Pressure Sensor Bracket Hardware
  • Two 3/4" Coolant Caps
  • Three 8mm Bolts
  • Three 8mm Washers
  • Three Zip-Ties
NOTE: This product CAN NOT ship to California due to CARB regulations.

 

Flo Pro Exhaust

Flo~Pro Part # 877NM
Our Part # FLO877NM

Fits: 11-17 Ford 6.4L Powerstroke

Flo~Pro 877NM 4" Downpipe Back Exhaust
2011-2017 Ford 6.7L Cab & Chassis - NO BUNGS - NO MUFFLER

Cab & chassis vehicles only (Rear center mounted fuel tank)

Race Application Only

NOTE: This product CAN NOT ship to California due to CARB regulations.

Reviews

There are no reviews for this product yet. Be the first!

Write a Review

Read Review

 
 
Spell Check
 
No videos are available.