bd diesel
1045266

BD Diesel SX-E S361 Turbo Kit - 2003-2007 Dodge 5.9L

5 out of 5
read reviews

Thoroughbred Sku #: BDDSXES361TURBODG0307

Item Options:

Prop 65:
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

$1,695.00

+ Free Ground Shipping

Product Details

Product Name: SX-E S361 Turbo Kit
Manufacturer: BD Diesel
Application: 2003-2007 Dodge Cummins
  • BD Single Turbo kits cover a range of turbos that are an easy complete bolt-on performance replacement for your OEM turbo, providing enough air for more power, response and reliability
  • The new SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
  • Larger compressor blade surface but with a smaller inducer results in quicker spooling, more flow than similar sized wheels
  • The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
  • BD exclusive feature of a heavy sprung waste-gated T3 turbine housing that mounts onto stock exhaust manifolds
  • BD's HD Waste gate and bracket holds boost and prevents over speed damage
  • Turnbuckle Boost Control allows for ease of adjustment for altitude and extreme tuning
  • Kit comes with downpipe, V-band clamp, band clamp
  • Note: Turbo mount exhaust brake cannot be installed with this kit - use remote mount exhaust brake

Upgrade the turbocharger in your 1994-2002 Dodge 5.9L Cummins with the BD-Power Super B Killer SX-E Turbo Kit. The SX-E Powered Single Turbo Kits from BD-Power have been specially designed as an easy bolt-on performance replacement for your OEM turbocharger giving you more power, response and reliability. The SX-E Turbo Kit includes all the needed components for installation.

The SX-E turbocharger line from BorgWarner was designed from the ground up for performance. Larger blade surface allows the SX-E models to spool quicker flow more, and be more efficient with a smaller inducer size. A BD-Power exclusive feature of the SX-E turbos is that they are waste-gated to mount on stock T3 manifolds. The SX-E turbos utilize enhanced, lighter, high strength FMW Forged Milled Wheels, which increase turbocharger life, pressure ratio, and turbo response compared to a comparable cast wheel. FMW's are standard on all SX-E turbos.

Item Options:

Prop 65:
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

Reviews

There are no reviews for this product yet. Be the first!

Write a Review

Read Review

 
 
Spell Check
 

Average Rating

5 out of 5

Based on 1 review

100% would recommend this item to a friend.

0% Rated this
0% Rated this
0% Rated this
0% Rated this
5 out of 5
Nice snail
 

I hooked this up to my 04’ 2500 ram with the bd two piece manifold, smarty JR on the 100 hp tune and intake bolt ons. 4in turbo back. Fass 95. Overall this is the perfect turbo for my daily driver and I can stack a bigger s400 in the future via pusher. The engine is so much happier with the extra air. Especilly noticeable at higher rpm. Has a good whistle but not to obnoxious. I tow goosenecks and machinery all the time and love how it behaves under load. Lots of low end grunt. No surging like the factory snail tended to do. Much much smoother pull getting into the throttle. I ran this with the factory manifold then swapped for the bd two piece. There was a noticable difference in performance and I would recommend going ahead with the manifold since you have to pull the factory one anyway. One install tip. Hook up the oil drain tube onto the new turbo before you install the turbo manifold assembly.

Would you recommend this product to a friend? Yes

 
Spell Check
 
No videos are available.