Edge EAS Pressure Sensor 0 - 100 psIg 1/8" NPT - 98607

Thoroughbred Sku #: EDG98607
Manufacturer Sku #: 98607

Item Options:

Install Sheet - PDF:
Prop 65:
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov


Designed for use with the EDGE Products CS2/CTS2/CTS3

Product Details

Product Name: EAS PRESSURE SENSOR 0 - 100 PSIg 1/8" NPT
Manufacturer: Edge
Manufacturer Part #: 98607
Thoroughbred Diesel Part #: EDG98607
Fitment Notes: Designed for use w/Edge Product CS2/CTS2/CTS3

Edge's EAS Pressure Sensor is a 0 - 100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edge s Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use Edge s Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more.

  • Tolerance: +-1.5% Full Span over temperature range of -20C to 85C and +-2.4% Full Span over temperature range of -40C to 135C.


  • I have an old 2008 edge juice with attitude. I also have a frame mount fass lift pump. Will this kit work with the tuner and how long are the wires? I would need a couple at least6-8 feet to reach my pump.

    Wade Hendricks | 3/14/2023

    Yes , but you will also need part#EDG98605


  • How long are the leads, will they reach from my lift pump to the engine compartment I have a Silverado extended cab short bed

    John Bogan | 5/27/2020

    8 ft long leads.

  • I need pressure sensor for dodge ram 2500 gen 3 cummins 5.9. Which parts numbers should I order? I am thinking that I need #98607 and #98605. Is that correct? Also I need to make sure that the sensor I receive will be the wet/ or dry sensor with 1/8 - 27 threads. Would that make it a different part number than the 98607?

    Thomas Kilgore | 4/30/2020

    You would need part#’s 98605 and 98607. The sensor will have the correct thread pitch etc.

  • will this show the fuel pressure reading and screw inside the filter housing. on a f250 6.0 2005

    Richie Sheets | 2/18/2020

    This is a pressure sensor designed to be used with an Edge product.

  • Will this sensor fit into my fass 150? And can i just buy the senor? I dont need the wiring.

    Andrew Gilbert | 7/11/2019

    It will fit in your Fass. It only comes with the sensor and wiring together.

May We Recommend