holset
holset-4027895

Holset Super 52 Turbo - 88-07 Dodge Cummins 5.9L (With Modifications) - 4027895

Thoroughbred Sku #: HOL4027895
Manufacturer Sku #: 4027895

Your Selected Vehicle Does Not Fit, Please Select a Vehicle

Select a Vehicle

Selected Vehicle

Year/Make/Model: {{year}} {{make.Name}} {{model.Name}} Edit

$1,663.13

+ Free Ground Shipping

Product Details

Product Name: Holset Performance Turbo
Manufacturer: Holset
Manufacture Part #: 4027895H
Thoroughbred Diesel Part #: HOL4027895
Fitment Notes: Holset Super 52 Turbo - 88-07 Dodge Cummins 5.9L (With Modifications) - 4027895H

1988-2007 5.9L Dodge Cummins (With Modifications)
Pro 52 Turbo

  • Engine requires serious modifications like "O" ringing, studding, larger injectors, external waste gate (preferably a 50 mm W/G), and manifold adapter (4038822).
  • Balanced to 112,000 rpm
  • 600+ HP capable
  • Depending upon model year and additional modifications, installation time is as little as 3 hours. (Installation is a bit more complex due to engine modifications required, again time is based on installer's ability, tool availability, and MY)
  • On 2003 and later trucks a 90 degree silicon elbow (available from Cummins under part number 3923178) must be used to connect the turbo discharge outlet to the IC tubing.
  • On 2004.5 trucks, two items of concern must be addressed. First on all 2003/2004/2005/2006 trucks, a silicon 90 degree elbow must be used to connect the compressor outlet to the vehicle's IC system as the compressor cover does not have the elbow built in.
  • Additionally, on 2004.5/2005/2006 with the Command Valve, a 100 ohm resistor is needed to be placed into the connector pins on the plug from the ECM to the Command Valve to "fool" the ECM into thinking it is still connected to the command valve.
  • The turbine housings use a 4.62" half-Marmon exhaust outlet. This will require a 4.62" aftermarket down pipe.
  • Fully clockable.
  • One issue was addressed with oil inlet line. We now supply with the turbo, an outsourced male-to-male fitting that replaces the current fitting in the line.

  • Over 1200 CFM airflow capacity.
  • 98 mm back face / 71 mm inducer.
  • 16 cm non-W/G Housing Standard.
  • Optional non-W/G 18 cm housing.
  • 5.0 pressure ratio capable although has been tested to as high as 74 psi.

Reviews

There are no reviews for this product yet. Be the first!

Write a Review

Read Review

 
 
Spell Check