bd diesel
bd-diesel-remote-mount-exhaust-brake

BD Diesel Remote Mount Exhaust Brake - 13-17 Dodge Cummins (Uses Factory Exhaust Brake Switch)

Thoroughbred Sku #: BDD1027343
Manufacturer Sku #: 1027343

Item Options:

Prop 65:
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

$1,310.00

+ Free Ground Shipping

Product Details

Product Name: Remote Mount Exhaust Brake
Manufacturer: BD Diesel
Manufacture Part #: 1027343
Thoroughbred Diesel Part #: BDD1027343
Fitment Notes: 13-17 Dodge Cummins (Uses Factory Exhaust Brake Switch)

The BD-Power 1027343 Remote Mount Exhaust Brake for your 2013-2017 Dodge 6.7L Cummins is the strongest in the industry! Descending grades with trailers can be hazardous and tricky situations, resulting in over heated service and trailer brakes, that lead to brake fade, excessive wear, and costly unwarranted repairs.

This exhaust brake kit allows you to keep the exhaust braking feature after the stock VGT Turbocharger has been removed and an aftermarket one has been put it in its place. This Exhaust Brake has been designed to be controlled by ECM just like the stock VGT turbocharger meaning it is controlled by the switch already in your dash. All of the features of the original brake including the cold weather warm-up feature, cruise control compatibility and the brake release on downshifts to reduce transmission wear will all still work. This kit comes complete with a control module and wiring harness to plug in where the stock turbocharger connected, this means there is no splicing into stock wiring, no wiring through the firewall and a much cleaner installation.

  • Ideal for applications where installed aftermarket performance turbo will not facilitate turbo mount exhaust brake
  • BD's exclusive Variable Orifice Technology
  • BD's solid, offset butterfly
  • Spring loaded cylinder
  • Pressure regulation
  • Provides up to 150 retarding horsepower throughout the engine's RPM range
  • Rugged, cast-iron housings
  • BD's exclusive alumibronze bushing
  • Piston ring-seals
  • Stainless steel butterfly shaft
  • Proven to stand-up under the harsh, high heat conditions of the exhaust environment
  • All mounting hardware are made of corrosion resistant stainless steel
  • Air compressor included

Warranty Parts

  • 24-Months
  • 24,000 Miles

Labor

  • 12-Months
  • 12,000 miles

Note: If truck has no factory exhaust brake switch on dash, order kit 1027340 instead.
Note: Exhaust Back Pressure test gauge kit 1030050 suggested for the set-up of exhaust brakes.
Note: Currently this product has been tested with Bullydog and H&S tuners. Please check with your tuner if using EFI (EZ Lynk) or HP Tuners as these products have been known to have compatibility issues.

Item Options:

Prop 65:
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

Reviews

There are no reviews for this product yet. Be the first!

Write a Review

Read Review

 
 
Spell Check