The
super sleek and modern design of the Prodigy stands out among
all brake controllers. Tekonsha has made installing and using
this brake controller simple and easy. You get high performance
for a low price!
Prodigy® is the most intelligent brake control. This powerful
control features new motion sensor technology similar to what is used
in the aerospace industry. With Prodigy® no manual level adjustment
is necessary, it adjusts itself to varying terrains as you drive.
It is equipped with a sensor that detects the tow vehicle's rate of
deceleration, applies proportional braking to the trailer and features
an exclusive "BoostSM" feature that gives users the ability
to apply more initial trailer braking power (especially when towing
heavier trailers). For backing into tough spots this is the only inertia
control that works proportionally in reverse. A digital display depicts
voltage delivery to the trailer during braking and displays continual
diagnostics check for proper connection, shorted magnet condition,
open ground and much more. A unique pocket mount allows for flexible
mounting options (standard mounting bracket included). Prodigy®
includes a 3 ft. pigtail connector for ease of connection when using
a vehicle's brake control wire harness. A quick and easy disconnect
feature allows users to remove the control when not in use and store
in a supplied protective pouch. Prodigy® meets National Highway
Traffic Safety Administration (NHTSA) regulations regarding tow vehicle/trailer
light activation. It also offers a limited lifetime warranty (some
conditions apply).
Part
Number: 90185 (Now Available)
Description:
Prodigy® Electronic Brake Control, for 1 to 4
Axle Trailers, Proportional
Warranty:
Limited Lifetime
Weight:
1.4 lbs.
Size:
3" L x 4.38" W x 10.63" H
Package
Type: Boxed
PRODIGY,
requiring no manual leveling, is a technological breakthrough among
inertia-activated brake controls. Equipped with a self-adjusting sensing
device similar to the one used in guided-missile technology to allow
for easy, flexible installation - from nearly horizontal to nearly
vertical - PRODIGY adjusts itself to the position of the tow vehicle.
PRODIGY™
FEATURES:
Applies power
to the trailer brakes in proportion to vehicle's deceleration.
No level
adjustment necessary - it adjusts itself to varying terrain as
you drive.
The only
inertial control that works proportionally in reverse - great
for backing into tough spots.
Digital display
depicts voltage delivery to trailer during braking.
Continual
diagnostics check for proper connection, shorted magnet condition
and much more.
Exclusive
"boost" feature gives users the ability to apply more
initial trailer braking power when towing heavier trailers.
Power-saving
mode reduces drain on battery when vehicle is not in use.
Quick and
easy disconnect feature allows user to remove and store the control
when not in use.
Meets N.H.T.S.A.
regulations regarding tow vehicle / trailer light activation.
Limited Lifetime*
Warranty. (*Some conditions may apply.)
Accessories
Included: Metal Dash Mount, Pocket Mount, Standard Harness, Instructions
Made for
up to four-axle trailer brake systems (8 Brakes)
Can be mounted
between 0 degrees (level) and 70 degrees
Boost levels
increase power up 0%, 13% and 25%
Power saving
sleep mode draws 3.6 milliamp
Included
pigtail wiring harness measures about 34" long
Version
2.6
Required:
For vehicles without brake control adapters.
20 amp. Circuit
Breaker (9506P) for 2-4 Brake applications
30 amp.
Circuit Breaker (38630) for 6-8 Brake applications
Call
866-737-4966 for a price quote on this
product.
