Allison GMax-6-3 2006-2012 Alto Manufactured, SunCoast Designed
2006-2009 GM Durmax
Clutches/Steels/Pressure Plates/C3/4 Pistons, TransGo® Shift
Kit® Hydraulic Upgrades parts, LU boost valve, A1-PR shim
and tool. Comes with complete paper and rubber gasket set, both
spin on filter and pan filter with our Filter Loc. All kits
have been designed and tested by SunCoast with parts that have
been designed and/or manufactured by us. All items included
in this kit are recommend and used by SunCoast. *Core Charges
for the C1 Pressure Plate, C3 Pressure Plate and C4 Pressure
C-1- Custom stepped apply plate, (8) Carbonite C1 external
clutches, (8) Carbonite internal splines clutches with a custom
C1 top plate.
C-2- Custom stepped apply plate with (7) C-2 frictions and
C-3- includes our (6) Carbonite double sided frictions with
no center slots and a waffle pattern in the material to help
retain oil to cool clutch when it’s not applied. (5)
Custom steels with no center slots. This design works great
in your daily driver, towing and even your extreme race conditions.
SunCoast has also redesigned the apply piston with improved
rubber compounds that are proven to hold more heat if the
circumstances arise. The custom piston allows us to use our
thicker spring apply plate that replaces the thin OEM one
deflects from the spring pressure and causes a uneven surface
for apply. This plate also redirects the oil to better lube
plates from the inside out which lubes the entire friction
rather than OEM style that lubes from the center out leaving
the inter half of the clutch burnt. Top apply plate is also
machined and included with kit.
C-4- includes (6) Carbonite single sided waffle pattern external
frictions and (6) Carbonite single sided waffle pattern internal
frictions. SunCoast also has redesigned the apply piston for
C4 with improved rubber compounds that is proven to hold up
to more heat if put in that situation than the OEM brands
will. The custom piston allows us to use our thicker spring
apply plate that replaces the thin OEM one that deflects from
the spring pressure and causes a uneven surface for apply.
This plate also redirects the oil to better lube plates from
the inside out which lubes the entire friction rather than
OEM style that lubes from the center out leaving the inter
half of the clutch burnt. Top apply plate is also machined
and included with kit.
*C5 clutches are NOT included do to the fact they are normally
good to re-use unless the unit has been contaminated by water
or other foreign elements. C5 clutches are optional and can
be added to our kit upon request.
Other parts included in kit are P-1 shim, lockup boost valve,
a shim to shim pressure regulator spring and a tool to make
it easy to install. TransGo Jr shift kit are also included.
This kit includes smart clutch control valves for increased
durability and Short-Crisp-Smooth-up shifts/ kick downs. The
Jr also reduces trouble codes.
Suncoast Allison paper and rubber kit includes all seals,
gaskets and o-rings required to overhaul the Allison 1000.
We work directly with the manufacture of our seal kits, so
any improvements/revisions are passed on to manufacture and
our kits are upgraded to pass the quality on to our customers.
We include a new spin on filter and new sump filter along
with our billet filter loc to prevent filter from working
lose and dropping out of the pump.
specify whether shallow or deep filter is needed with purchase
are included in kit and phone support is available as well.
KITS ARE INTENDED FOR PROFESSIONAL INSTALLATION.
Charges for the C1 Pressure Plate, C3 Pressure Plate and
C4 Pressure Plate apply.
kits are available upon request. Parts included are manufactured
or designed in house making it easier to tailor each kit to
the needs of the customer and the potential of their vehicle.