The premium all-season, multi-function diesel fuel additive,
designed to tackle virtually any diesel fuel related problem.
Clearly, the most comprehensive, multi-function diesel fuel
additive available is Stanadyne Performance Formula. It is the
only additive that addresses virtually any diesel fuel-related
problem with one product, and is the only one that is:
by a fuel injection equipment manufacturer.
by several OEMs.
to perform best in independent testing
all-season all purpose diesel fuel additive, designed to tackle
virtually any diesel fuel related problem. Approved by many
OEMs including GM, Ford, Deere & Navistar meets Cummins L10
Superior test for cleanliness.
Performance Formula Features:
Weather Protection - reduces #2 diesel fuel pour
point by up to 40°F (22°C) and cold filter plug point
by up to 25°F (13°C), depending upon base fuel.
Weather Protection - lubricates and cetane improver
help when fuel is hot and "thin".
Horsepower - with up to 5 point cetane gain, resulting
in better acceleration, power, etc.
Fuel Economy - independent tests have shown up to
8% improvement in MPG.
and Faster Start-Up - in cold weather, when fuel
can gel or very hot conditions, when fuel viscosity is low.
Smoke and Particulate Emissions - helps pass smoke-meter
Cleans and Protects Injectors and Other Components
- detergents and deposit modifiers help remove varnish and
other deposits to prevent plugging.
Wear of Expensive Fuel Systems - lubricants protect
against effects of low sulphur fuel.
and Stabilizes Fuel - no need to buy expensive "premium"
or blended fuel. Keeps fuel fresher and reduces sludge.
Remove Water - special water demulsifier causes tiny
water droplets to come out of suspension/emulsion, so the
filter/water separator can be more effective.
Free - avoids corrosion and accelerated wear.
to Treat - add before filling.
- room temperature recommended
all fuel system requirements regardless of make, model or
by Original Equipment Manufacturers (OEMs)
Weather Protection - reduces diesel pour point up to 40°F
(22°C), and cold filter plug point by up to 25°F
(13°C), depending on base fuel
Weather Protection - lubricants and cetane improver help
when fuel is hot and "thin"
Horsepower - with up to 5 point cetane gain to improve combustion,
resulting in better acceleration, power and torque
Fuel Consumption - independent tests show gains up to 9.6%
and Faster Starting - in all conditions
Smoke and Particulate Emissions - and is suitable for ultra
low sulfur diesel
and Protects - detergents and deposit modifiers help protect
injection pumps, injectors, nozzles, etc.
Wear - lubricity improvers restore lubricity to ultra low
sulfur and other low lubricity diesel fuels
Fuel - antioxidants keep fuel fresher
the formation of corrosion and rust
No Alcohol - avoids corrosion and accelerated wear
Remove Water - special demulsifiers cause tiny water droplets
to come out of suspension/emulsion, so the filter/separator
can more effectively remove water
Formulated for use with ultra low sulfur diesel fuel
be used with Bio Diesel Fuel up to B20 (20% bio content
approved ) - increased water separation shown in bio content
up to B20
Stanadyne Diesel Fuel Additives can be blended with each other
and "double-dosing" is not damaging - although it
may not provide twice the benefit.
engine and vehicle OEMs have approved Stanadyne, most of
them recommend Performance Formula, which should be used
year-round to ensure protection against fuel related problems.
Treatment: 4 ounces Performance Formula per 15 gallons of fuel
Stanadyne CAN NOT ship to Hawaii and Alaska
due to hazardous material transport laws.
Stanadyne can only ship ground, we can not ship Stanadyne
Next Day Air or 2nd Day Air.