This Dyna Max kit features a full feramic lining and an organic
lining on a marcelled fin. The pressure plate is modified for
higher plate load and smoothness of engagement. This clutch
is best suited for towing purposes. This kit is rated up to
450 horsepower & 1000 ft. lbs. of torque. Years 2000.5 -
2005.5 ETH with NV5600 Trans.
Dodge Diesel Trucks Very important Please read before continuing!
When choosing a clutch it is very important to match the appropriate
horse power and work load. For example: The MU 0090 Rally and
MU 0090 Con O are capable of handling the horse power and torque
ratings provided in our listings, but if the truck is used for
heavy hauling when coupled with torque ratings exceeding 600
ft. lbs. damage to the clutch disc WILL occur. The cause and
effect is the 12 1/4" disk does not provide enough dampened
area to absorb the added torque of the Cummins along with heavy
hauling. These two clutch kits are fine for light towing and
performance. If you are going to be towing in excess of 8,000
lbs. while exceeding 600 ft. lbs. of torque you must go with
the MU 13-1.25 Con O, OFE or FE. This will offer a clutch that
will handle heavy towing with vehicles equipped with the higher
torque ratings. This clutch only applies to trucks with 5 speed
transmissions and early 6 speeds that are not equipped with
the HO engine. If a 12 1/4" clutch is purchased from us,
or one of our distributors, and gets destroyed at the dampened
portion of the disc, warranty will not be granted.
Do not try and save money when it comes to choosing a clutch. This
will only cost you more in the long run.
