NOTE:
This product CAN NOT ship to California due to CARB regulations.
Filters Solid Particals Out of Coolant FREE
SHIPPING SPECIAL
Coolant
Filter Kit for Ford Powerstroke 6.0L / 6.4L
Sinister's Coolant Filtration System / Filter Kit for the Ford
Powerstroke is a bypass-style system that filters a small amount
of the coolant on each pass. By using a spin on filter they
make it easy for you to change your coolant filter at regular
intervals. These filters will remove all solid particles. Install
a coolant filter in order to extend the longevity of your cooling
system components. Typically you will use 3 filters in the first
9 months. Once the initial 9 months has passed you will only
need to change the filter 1 time a year.
The coolant filter should be changed out several time within
the first year of having the coolant filter kit installed. The
first filter should be changed out within the first 500 miles
as it will catch the most debris. The second filter should be
changed out at about 3000 miles. The third filter should be
changed out after the first year. The intervals may vary depending
on the amount of debris in the engine. We recommend cutting
open the filters to determine how many times and how often the
filter should be changed in the first year. If the filter is
still very dirty after the second interval, you may want to
do an additional filter change in between the 3000 mile mark
and the end of the year. After the initial year, you should
change the filter out once every year after that.
NOTE:
This product CAN NOT ship to California due to CARB regulations.
