The
easy 30 minute install of the new updated "Blue Spring"
will increase your fuel pressure back up to where it should
be from the factory. Most 6.0's see an increase of 10 psi
of fuel pressure. The added fuel pressure will help keep the
injectors from out flowing the stock fuel pump, meaning no
air in the injectors, and an injector that will live much
longer. Most trucks will actually quite down a little at idle,
rev up a lot quicker and with the added fuel pressure, a little
quicker spool up on the turbo. The kit does include all the
O-Rings and hard parts to rebuild the fuel pressure housing.
This kit
also comes with a Brand New Billet Aluminum housing to keep
the regulator sprig set and to prevent leaks from the housing.
This is a much thicker, stronger billet piece than the factory
Cast Aluminum spring housing. The factory unit is known to
leak or "weep" fuel from the sides. This kit will
also help clean up the look of the factory filter housing
as well.
For
Adjustable Billet Spring Housing:
Another
major bonus is that this block has an adjuster screw in it.
This will allow you to bump pressure up a little for big injectors.
Or after the spring settles after years of abuse, just loosen
up the jam nut, and run the adjuster screw in a turn or two
to get your fuel pressure back to where you want it. Every
body has their own opinion of fuel pressure in a 6.0L Powerstroke,
why not choose for yourself, we recommend setting it between
55-68psi |