Basic 6.0L Solution with Upgraded EGR Cooler
6.0L Basic Solution Kit with Upgraded EGR Cooler
Fits 2003, 2004, 2005, 2006, 2007 Ford 6.0L Refundable Core Charge: (core
will be funded to your credit card once we receive your old
Basic 6.0 Solution with EGR Cooler Includes:
Upgraded EGR Cooler
Turbo bolt / O-Ring kit
warranty on Oil Cooler
This product CAN NOT ship to California, Colorado
or Arizona due to CARB regulations.
OFF Sinister Diesel - Instant Rebate
PLUS FREE SHIRT with orders
10% off Sinister Diesel now through Cyber Monday. Instant
Rebate when you press buy button.
a Free Shirt* with any Sinister order.
free to request a shirt size in the comments of your order,
however there is no guarantee your shirt size.
Customers in heavy smog tested counties have been asking for
it and here it is. A Upgraded EGR Cooler looks and fits like
stock but without all the factory egr cooler problems. We have
removed the factory honeycomb material inside and replaced it
with a series of stainless steel tubes. The tubes allow the
exhaust gas to flow more freely and faster eliminating a chance
of clogging. The Sinister Upgraded EGR Cooler is tig welded
and every cooler goes through a series of pressure test to ensure
you’re getting a leak proof cooler.
Sinister Basic Solution
with EGR Cooler
Fits 2004, 2005, 2006, 2007 Ford 6.0L
Sinister Basic Solution
with Round EGR Cooler
Fits 2003 Ford 6.0L
not Require Complete Removal of Intake Manifold
saving hours of install time
of existing EGR Cooler
on vehicles in heavily smog tested counties
TIG Welds Guaranteed not to Leak
is replaced with bigger stainless steel tubing which allows
for better exhaust gas flow into manifold
Will not throw
a Check Engine Light on any year 6.0 Powerstroke
Newest version of oil cooler for the 6.0 powerstroke. Thicker
internal fins to minimize chance of cooler failure. The Oil
Cooler includes new gaskets for easy installation.
New Updated stainless steel screen. This change allows better
filtering of particles in oil and will not tear like the original
Removal of the intake manifold is necessary to install a oil
cooler. In the basic solution we supply you with a new set of
intake manifold gaskets.
Bolt / O-Ring Kit
New mounting bolts for re-installation of the turbo and pedestal.
New spacer washers and line clip. New O-Rings for the oil return
and pick up lines going to and from the turbo. Also included
is a new paper gasket that fits in-between the turbo and turbo
Hassel Free Core Label For a small fee Thoroughbred Diesel will send you a
core return tag either to your email or right to your mail box.
Only available for the 48 contiguous states. For more information
This product CAN NOT ship to California, Colorado or Arizona
due to CARB regulations.