surface area provides 60% more heat rejection
takes approx. 30 minutes
heat is the #1 killer of transmissions. For individuals who
tow, race or simply run their diesel hard, know that proper
cooling of your transmission fluid is one of the most important
things that you can do to increase the life of your transmission.
PPE’s Performance Transmission Cooler is a bolt-on replacement
part that lowers the fluid temperatures up to an additional
20 to 30 degrees over the stock unit. When the mainline pressure
is increased with things, such as a high performance transmission
kit, you end up with additional heat being generated, so we
recommend a Performance Transmission Cooler in such applications.
your transmission cool with PPE’s performance transmission
cooler. Lower your transmission operating temperature with this
bolt on replacement. 60% increase in heat rejection surface
lowers temperatures 20-30 degrees. This easy installation only
takes about 30 minutes. Available for 2001-2009 Duramax diesel
Performance Engineering has developed a bulletproof solution
to extending the life of your Allison transmission, and to dramatically
reducing temperatures by up to 60%. This easy bolt in replacement
transmission cooler for your Allison will include everything
needed for professional installation.
All of the orafaces in the cooler have been properly positioned
to accept the factory GM plumming, and will require zero modification.
Your Transmission Cool With PPE’s Performance Transmission
Your Transmission Operating Temperature With This Bolt on
Increase in Heat Rejection Surface
Temperatures 20-30 Degrees
Installation Only Takes About 30 Minutes
For 2001-2009 Duramax Diesel Engines
This product CAN NOT ship to California due to CARB regulations.