Pace Edwards Jackrabbit tonneau cover

The JackRabbit's weather-resistant, padded polymer cover is laminated to rigid aluminum panels for a tight, solid fit. Your cargo is protected from rain, snow, dirt and wind wherever you travel. The cover locks every 12”, automatically catching into each position as you pull it forward.

The low-profile tonneau cover design is 100% flush-mounted with texture-finish rails and top cover. It’s designed to clamp in easily to your cargo bed with no drilling. For easy access, the handle and lock are mounted to the driver’s side. Your Pace Edwards JackRabbit Retractable Tonneau Cover is backed by a 1-year warranty.

Will the cover keep the truck bed dry? What about ice and snow?
The JackRabbit is designed so that water collected on the top is carried to the canister. Drain tubes located at the base of the canister then take the water outside the truck, to help keep your truck bed dry. Water cannot pass through the one-piece polymer top, however water may intrude into the bed via components that are not part of the JackRabbit such as the tailgate, stake pockets, etc. These components require proper sealing during installation. We do not claim that our covers are 100% waterproof and have never heard of a competitors cover that is either. Be very cautious if a manufacturer says that their retractable cover is 100% waterproof.

Snow should be swept off of the cover with a broom before operating the cover otherwise you will end up with the snow in the truck bed. Ice can be removed by taking your hand and smacking the cover as close to the middle as possible this will cause a vibration in the cover that breaks up the ice making it easy to remove. Do not use anything but your hand for this.

Is the cover hard to install? How long will installation take?
Installation is easy. All parts are an exact match to your truck – no cutting necessary! JackRabbit covers are installed with our patented SpeedClamp™ system on most applications. Installation should take under 1 hour for the professional and 1½ -2 hours for a first time installer. See the installation instructions here.

How does the JackRabbit lock?
The JackRabbit locks with a key Offset to the driver’s side near the tailgate. The key turns arms that lock into the side rails mounted on the sides of the truck bed. The JackRabbit can be locked in place at 12 inch intervals along the truck bed.

Will the cover improve my gas mileage? How?
Your gas mileage should improve between 7% and 10% on the highway, with the cover closed on the bed (except when towing). A university study shows substantial gas mileage improvement whenever the box of a pickup is covered. See the press release information on gas mileage savings here. Input from customers and our own experience bear out the accuracy of this claim.

Will the cover work with my bedliner?
The rails on our cover are designed to fasten directly on the sill of the truck bed. If you have a bedliner that covers the sill, modification will be required. Most under-the-rail bedliners are more easily fitted with our cover, but may also require modification near the front corners. See Bedliner modification sheet here. Please call our Technical Support Reps for information regarding fit with your bedliner.