Pace Edwards full metal jackrabbit cover

The JackRabbitª Cover retracts automatically using an independent latch and lock mechanism with built in pull strap, and opens and closes without needing the key. The smooth-action roll-top cover has locking positions every 12 inches, and automatically catches into each position as you pull it forward. JackRabbitª has a low-profile, aerodynamic design that is 100% flush-mounted with texture finish aluminum rails. Weather resistant, rigid aluminum panels for strength, durability and light weight. The JackRabbitª features Pace Edwards patented SpeedClampTM system for an easy, no-hassle installation. Look below for key features that the new full metal jackrabbit bed cover offers.

Continuous Tension Spring™ (CTS)
Pace Edwards exclusive Continuous Tension Spring allows the JackRabbit and Roll Top Cover to be closed with the least amount of effort in the industry. Over 50% less than some of our competitors!

ArmorTek™ Deck
Pace Edwards ArmorTek deck material combines roll formed aluminum panels with automotive grade vinyl. This unique composite cover gives you all the strength you need and the good looks you want!

LoProfile Design
Flush with the top of the bed rail, Pace Edwards LoPro canister design provides a sleek look that enhances the beauty of your truck.

Latch n’ Lok™
Weather sealed, low profile Latch n’Lok operating system allows the cover to be latched every 12” providing maximum use of your bed. The latch is offset to the driver’s side so you don’t have to crawl into the box to lock the cover when partially open.

Full-Metal™ Deck
JackRabbit Full Metal Deck is made of tough powder coated extruded aluminum panels, interlocked for strength and durability.

JackRabbit™ Full-Metal™
Combining all the great operating features of the original JackRabbit with the strength and durability of an all-metal deck, JackRabbit Full Metal is the toughest, best looking retractable cover on the market!

Canister
Thicker, lighter and stronger than aluminum, Pace Edwards canisters are constructed of thermoformed ABS, a composite material widely used in exterior truck applications because it won’t dent or rust. No additional bulky shields required!

It is important to open and close the cover regularly; the spring that operates the cover is self-lubricated and regular use assures that it stays in proper working condition.

After installation, if the cover is tight or hard to open and close, the shimming may need to be redone. Over a period of time, if the cover becomes difficult to move in or out (particularly on hot days), check that the side-to-side clearance on the Full-Metal JackRabbit is set at least 1/8” on each side.

Drain tubes may become clogged over time and should be removed and cleaned. Periodically remove the top cover and clean out the canister.

To help keep the Full-Metal JackRabbit retractable tonneau cover looking its best, we recommend washing it the same as caring for your truck finish. However due to the hammer texture, removal of wax can be difficult so you should not wax your cover.