guide to Smarty SSR software levels
No need for a PC. No need to know about binary code. No need
to spend countless hours on a complicated software. No need
to become a software engineer to fine tune your truck! The SSR
delivers the right combination of performance parameters to
fully customize your engine. No matter what modifications you
have done to it! Whatever race and class you want to compete
in, the SSR has the answer!
The SSR provides just one base performance software that takes
care of all the limiting factors like the speed / RPM / Torque
& boost limiters. Then you will need to fine tune the
injection duration, injection timing & rail pressure to
the truck's needs. The three most critical performance parameters
in a Diesel engine! In order to allow the complete customization
of the performance software to the particular engine's needs,
the SSR provides 50 levels each for the following parameters:
1) Low Load injection Timing ( LLT )
2) High Load injection Timing ( HLT )
3) Low Load injection Duration ( LLD )
4) High Load injection duration ( HLD )
5) Low Load Rail Pressure ( LLRP )
6) High Load Rail Pressure ( HLRP )
All you need to do is to select the tuning parameters that
match your truck best, voilà.
trace is left in the ECM!
100 power levels selectable in just one second during the
driving! It's easy: just type the preferred power level directly
on Smarty keyboard, from 00 to 99. That's all! For security
reason, the truck waits that the throttle is released before
applying the new power level.
I hereby CLAIM that Smarty is the FIRST AND ONLY downloader
that does not erase any of the stored data in the ECM. Smarty
does NOT leave any electronic footprints in the ECM or any other
electronic module in the truck. Smarty does NOT set ANY codes
once the ECM is set back to stock. Smarty does NOT need to have
matter what the competition claims , in one way or another
they're ALL detectable. Smarty is NOT!
can not do one thing for you. Fix what others have broken.
Smarty can not restore a key on counter that another downloader
has erased . Smarty can not fix VIN# troubles caused by other
products. If your Check engine / ABS light is on because another
product has screwed your ECM, Smarty can not fix it, the other
guy HAS to...
/ Speedo recalibration
The tire height can be adjusted up to 44" in increments
of 10 tenth of an inch in just a couple seconds. Of course,
Smarty needs to be VIN# locked to the truck in order to get
into the ABS adjustment section.
The name says it all. You can read and erase codes. Codes
are displayed also in plain English. That's old news by now.
Smarty S-03 was the first one to provide that utility, others
found the idea to be a good one too. ( Smarty does erase ABS
codes too but does not display them )
Faster than anything else on the market! Again we've done
our homework on the protocol. Less than 5 minutes. Three times
faster than a Star-Scan diagnostic tool or competitor.
developed our own bootloader in order to not have to pull
fuses should an update become interrupted for any reason.
All you have to do is to turn the key off / key on Smarty
does everything else on it's own.
The CaTCHER software as they are today are only a starting
point. Expect major news in future. We're for your feedback,
opinions, likes, dislikes... We will make Smarty do what YOU