settings. except #0, all other softwares have a
modified "Torque management" ( TQM ). The throttle
is greatly improved but is set to a save limit. With "Save"
save for your tranny and rest of the driveline.
SW # 0 :
SW # 1 :
30 Hp increase, with added timing
SW # 2 :
60 Hp increase, no added timing
SW # 3 :
60 Hp increase, with added timing
SW # 4 :
90 Hp increase, no added timing
SW # 5 :
90 Hp increase, with added timing
SW # 6 :
130 Hp increase, no added timing
SW # 7 :
130 Hp increase, with added timing
SW # 8 :
170 Hp increase, no added timing
SW # 9 :
170 Hp increase, with added timing
Tested on stock
trucks on a Mustang Dyno. Stock means just that. Stock! Even
the air filters were stock...
The trucks were S T O C K, even the wastegate settings! We checked
the "baseline" ( the stock truck Hp at the rear wheels ) twice
in a day in order to be sure about our findings. The above declared
HP numbers are all rounded down to the closest number. For example
the 90 Hp file actually did 96 Hp. That's a 90 Hp software for
me, not a 100. The 170 Hp was 174.
No trace is left in the ECM!
I herby CLAIM that SmartyCR is the FIRST AND ONLY downloader
that does not erase any of the stored data in the ECM. Smarty
does NOT leave any electronic footprints in the ECM or any other
electronic module in the truck. Smarty does NOT set ANY codes
once the ECM is set back to stock. Smarty does NOT need to have
No matter what the competition claims , in one way or another
they're ALL detectable. Smarty is NOT!
Yet, Smarty can not do one thing for you. Fix what others have
broken. Smarty can not restore a key on counter that another
downloader has erased . Smarty can not fix VIN# troubles caused
by other products. If your Check engine / ABS light is on because
another product has screwed your ECM, Smarty can not fix it,
the other guy HAS to...
ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of 10
tenth of an inch in just a couple seconds. Of course, Smarty
needs to be VIN# locked to the truck in order to get into the
ABS adjustment section.
DTC Code reader
The name says it all. You can read and erase codes. Codes are
displayed also in plain English. That's old news by now. Smarty
S-03 was the first one to provide that utility, others found
the idea to be a good one too. ( Smarty does erase ABS codes
too but does not display them )
ECM update speed
Faster than anything else on the market! Again we've done our
homework on the protocol. Less than 5 minutes. Three times faster
than a Star-Scan diagnostic tool or competitor. We have developed
our own bootloader in order to not have to pull fuses should
an update become interrupted for any reason. All you have to
do is to turn the key off / key on Smarty does everything else
on it's own.
The CaTCHER softwares as they are today are only a starting point.
Expect major news in future. We’re for your feedback, opinions, likes,
dislikes... We will make Smarty do what YOU want, TOGETHER.
guide to Smarty’s special Features
in the industry, up to three times faster than
the competition, a typical ECM update takes about 3.5 to
minutes, depending on the truck model.
height updates in just few seconds.
in the stock setting. Smarty leaves no footprint.