These Lifetime Oil Filters are made to last just that a lifetime, just clean and reuse no need to buy more than one oil filter for your Dodge Cummins. Thoroughbred Diesel is your source for Lifetime Oil Filters. If you do not see the Oil Filter listed for your diesel truck, stop clicking and call us toll free at 866-737-4966.
Oil Filters are made of the strongest alloys, fluouoelastomers
and threads. Combining over two feet of T316 L woven media
with their filtered bypass valve, this is simply a product
engineered and manufactured to a higher standard.
Lifetime Oil Filters continue to filter oil even while operating
in bypass mode by using a patented, integrated secondary filtration
system. These filters are three times larger than most standard
and billet oil filters currently on the market today.
so special about our oil filter?
As you can see our oil filters are built like a tank but with
a carbon footprint of a butterfly! Made of the strongest alloys,
fluoroelastomers, and threads with over two feet of media in
each filter, it’s simply a product manufactured to a higher
standard. This is how we can offer a “lifetime warranty”
on our filters. Typical filters use a bypass valve that allows
unfiltered oil back into your engine. Why? This is a stop-gap
on inferior filters to increase oil flow when the oil is cold
and more viscous or if the oil is a heavier weighted grade,
to ensure adequate lubrication at all times. The problem with
this outdated design is that the filter is no longer filtering
your oil! Worse, the oil that is flowing through the filter
is picking up stored contaminants and reintroducing them back
into your engine! The effects can be devastating in a very short
period of time. Lifetime oil filter® continues to filter
oil even while operating in bypass mode by using our patented,
integrated secondary filtration system. Our filters are three
times larger than most standard and billet oil filters currently
on the market today. We use only the highest quality of materials
designed to last a lifetime: Nitronic 60, Tungsten, T316L, Hasteloy
and Viton® seals are included in our parts lists.
easy is the filter to install?
It takes about ten minutes to install our filter system in
a driveway or just a few minutes on a lift. If you can screw
in a light bulb, you can install our oil filter! (In some
cases a remote oil filter relocation kit may be required or
desired for easier access or for
Can I clean and maintain the filter myself?
Absolutely! We recommend you clean your filter media with
hot tap water and plain old dish soap. In commercial applications,
a parts washing system will achieve excellent results. Dry
the filter with a synthetic cloth or a household hair dryer
before reinstalling the cage section of the filter onto the
mounting plate. We recommend removal and cleaning of the filter
every 3000 miles to ensure your system is working at its highest
capacity. Remember our motto: