 |
JET
Performance Dodge Module |
| The
JET Performance Module for Dodge, Chrysler and Jeep vehicles
is a JET exclusive. Dynamic Spectrum Tuning provides power gains across
the entire power band-not just at full throttle. Point by point air/fuel
ratio, ignition advance and various other tuning points provide performance
gains of up to 25 horsepower. Improves throttle response, acceleration
and low end torque. Simple, plug-in installation in less than 30 minutes.
Available in Stage 1 and Stage 2.
*For
1989-Current Dodge cars, trucks and SUV's.
Stage
1-For stock or mildly modified vehicles. Fuel and timing
curves are modified for optimal performance and mileage using less
expensive, lower octane fuels. Programming is designed to burn fuel
at peak efficiency, which results in improved performance and mileage.
Daily drivers can use lower cost regular fuel for potential mileage
gains, but for optimal performance gains use of mid-grade or better
is recommended.
Stage
2-Designed for the performance enthusiSSt, the Stage 2
features more aggressive programming to make the most horsepower
and torque available. Fuel and timing curves are extensively modified
for peak performance and drivability. Requires use of 91 octane
fuel, 180 degree thermostat and free flow exhaust. Also works well
with aftermarket intake systems, mSSs air sensors, TBI spacers,
etc.
*See
Domestic Information section for horsepower gains and dyno charts.
*Stage 2 part
numbers end with "S".
|
 |
| Description |
Quantity |
Order |
|
