of up to 35 HP
and 50 Ft Torque
Design Stays with the Vehicle as a State-of-the-Art Display
with a Custom Designed Mounting Pod
Updateable over the Internet
Speed, Rev Limiters, Adjust Tire Size and Gear Ratio
and Clear DTC Codes
the best, but the best looking programmer now available. Simple
to install, this ultra-modern device is designed from the
ground up to compliment your truck. The Evolution Programmer
delivers substantial power gains, provides display technology
and is shipped with a custom pod to look factory installed.
When used in its programmer mode, the Edge Evolutions provides
3 power levels (transmission only, tow and performance) designed
to extract the most performance from the fuel you are using.
With gains up to 35 HP and 50 ft. lbs. of torque, you will
feel like you put a new engine in your truck.
The Evolution also provides a special mileage tune designed
to extract maximum performance from low-octane fuel. Going
from one power level to another has never been easier - the
Evolution programs in under 20 seconds. You can also calibrate
for different tire sizes and gear rations, and change speed
and rev limiters. When used as a scan tool, the Edge Evolution
allows the user to check and clear diagnostic trouble codes
with simple, clear text descriptions of the error.
Your Evolution monitor allows you to monitor the performance
of your engine's vital engine components and output values.
The following parameters can be displayed on the main Evolution
screen (maximum 4 at one time):
Pressure Control Desired
Air Flow Sensor Voltage
Cam Timing Actual Advance
fuel/spark Limiting Status
Evolution can sound an alert when certain engine parameter
levels are met. The following alerts are available:
track of your performance by recording maximum/minimum for
a variety of parameters including:
- ¼ mile
Speed and Rev Limiters
in fuel efficiency varies based on driving style.