Using factory-style
connections in just thirty minutes you can add five levels of adjustable
power ranging from 40-150 horsepower and increase torque up to 350
ft. lbs. The Juice greatly improves responsiveness and driveability,
while at the same time increasing fuel economy.
The Juice communicates
along the engine’s CAN-BUS data stream, from which it receives
vital engine, transmission, and fuel system information. This enables
the Juice to provide smooth and precise power curves that are truly
custom, rather than just an offset from stock.
The Juice also
monitors the transmission slippage when the torque converter clutch
is engaged. The level of additional power is decreased if any slippage
is detected. This prevents damage from being caused to the transmission,
and also prevents the power train from erroneously generating fault
codes and entering “limp mode”.
The Juice also
limits the amount of power increase during transmission shifts when
the torque converter clutch is engaged and also when the torque
converter clutch is being engaged. This allows the torque converter
clutch to engage without slipping.
When used in
conjunction with the Attitude monitor you can control the five power
levels on-the-fly from inside your truck. The Attitude displays
all the information a complete set of gauges would and will automatically
monitor and display exhaust gas temperature (EGT), turbo boost and
transmission slip and de-fuel the engine to prevent excessive EGT,
boost levels or transmission slippage. It also displays 0 –
60 times, quarter mile times and actual speed if you are using non-stock
tires as well as a host of other parameters.
The Juice communicates
directly with the engine’s ECM, from which it receives vital
engine and fuel system information. This enables the Juice to provide
smooth and precise power in real time under any driving condition.
Imagine, within minutes you get incredible power gains, an increase
in mileage and the equivalent of a complete set of gauges with one
simple installation!
The following
power gains are representative of an actual test vehicle. These
gains were measured on a SuperFlow Dyno at an altitude of 4400 ft
above sea level, and represent power delivered to the rear wheels
of the test truck. The only modification made to the test truck
was the addition of the Edge Juice module. Power gains may vary
based on vehicle and geographical location.
Level 0: Stock
Level 1: 40 Horsepower - 150 Foot Pounds of Torque
Level 2: 60 Horsepower - 180 Foot Pounds of Torque
Level 3: 75 Horsepower - 200 Foot Pounds of Torque
Level 4: 90 Horsepower - 250 Foot Pounds of Torque
Level 5: 125 Horsepower - 325 Foot Pounds of Torque
Level 6: 150 Horsepower – 350 Foot Pounds of Torque
Hot Unlock Code plus additional fee required for level 6. For pricing
information and to get the unlock code you must complete a waiver
located under product updates.
Your Attitude
monitor allows you to monitor the performance of your engine’s
vital engine components and output values. The following parameters
can be displayed on the main Attitude screen (maximum 4 at one time):
• Boost
• EGT
• Barametric PSI
• Speed MPH
• Engine Coolant Temperature
• Gear
• Intake Air Temperature
• Load%
• Slip %
• Transmission Temperature
• Throttle%
• Turbo Boost PSI
• RPM
• Backdown
That Attitude
can sound an alert when certain engine parameter levels are met.
The following alerts are available:
• EGT
• Boost
• Engine Temp
• Speed
Keep track of
your performance by recording maximum/minimum for a variety of parameters
including:
• Max Engine Temp F
• 0-60 times
• ¼ mile times
• Max RPM
• Max Speed
• Backdown %
The Juice alone
provides the following power gains with:
Level 1: 40 Horsepower - 150 Foot Pounds of Torque
Level 2: 60 Horsepower - 180 Foot Pounds of Torque
Level 3: 75 Horsepower - 220 Foot Pounds of Torque
Level 4: 90 Horsepower - 250 Foot Pounds of Torque
*Increase in
fuel efficiency varies based on driving style.
Click
here to download the Hot Unlock Form
Not legal for
sale or use in California on pollution-controlled motor vehicles.
