CNC machined fittings are now Stainless Steel!
will have to acquire a few items on your own. You will need:
passenger side valve cover
undercover gasket -Ford part number W301385
means you decide to re-route your crankcase vent system
hose. We can help you with ideas.
testing their high pressure oil pumps, Dieselsite found that
the 6.0L pumps were capable of more output that was being
limited by a poor delivery system. They created a new system
that will allow even a stock pump to realize more output.
But, if you're installing a larger volume hpop - like the
Adrenaline or a dual pump setup in your 6.0L, then this delivery
system is required in order to realize the full potential
from the larger volume.
the HPODS for the 6.0L, modified or even stock trucks will
notice a quieter engine, quicker starts, better throttle
response and more power. Those with larger injectors will
notice more power from their programs. You'll be able to
maintain higher pressures in your hotter tunes.
6.0L HPODS - High Pressure Oil Delivery System - will include
a CNC machined distribution block, three CNC stainless steel
adapters for engine connections, two custom precision hydraulic
metering control devices, ICP extension harness, Stainless
braided high pressure hoses with firesleeve protectant cover,
bracket and hardware, and all fittings to complete the installation.
None of the CNC pieces, extention harness,or flow
control valves we include in our system can be purchased
anywhere. We had to design these for this application.
The hoses that are used are the best that can be made. They
are factory built, stainless braided high pressure hoses
made to withstand 5000psi constant working pressure, 20,000lb
burst pressure, and 600 degrees. This is not your
typical hydraulic hose. You cannot buy these at your local
this eliminate the factory system? I have a current leak
this is a parallel system. It feeds the heads along with
your factory system.
won't this work on the 03 models?
2003-early 2004 model year trucks were not equipped with
the ports in the oil rails to make this system possible.
If you rebuilding the engine, and you upgrade your oil rails
to the later models, then you can use the HPODS.